GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: mr wong on 08 October 2005, 16:24

Title: Front Fogs
Post by: mr wong on 08 October 2005, 16:24

As I have explained before I am a bit of a twit when it comes to the mechanics of cars and I don't have a clue!!!!!! :embarrassed:


How do I remove my existing front fogs from the bumper and fit my nice new shiny crystal ones that arrived this morning! :grin:

Anybody who can help I would appreciate it! :huh:

Title: Re: Front Fogs
Post by: MrF16vmk3 on 09 October 2005, 01:58

First remove the reflector between the indicator and original fog light, by pulling or levering it out from the foglight/inboard end. Then you should see two screws holding the foglight in place, undo these carefully while holding the metal clips they screw in to or they can drop off and get stuck behind the bumper. The foglight should now pull forward enough to disconnect the wiring connector at the back of the light.

Title: Re: Front Fogs
Post by: mr wong on 09 October 2005, 11:39

Ch3ears,

Just a bit of brute force popped out the old ones and in went the shiny new crystal ones, although I feel as though they may be a bit loose! In danger of popping out at the first big pothole!