GolfGTIforum.co.uk

General => General discussion => Topic started by: rud on 08 October 2005, 15:12

Title: vr6, wat bhp as standard
Post by: rud on 08 October 2005, 15:12
just wondering if anyone can tell me wat bhp a standard vr6 runs at, thanks, andy
Title: Re: vr6, wat bhp as standard
Post by: Agreeable Slick on 08 October 2005, 15:16
A quote from parkers car guide

" and 2.8 VR6 (174 bhp)"

 :smiley:
Title: Re: vr6, wat bhp as standard
Post by: rud on 08 October 2005, 15:22
checks slick, will msn you later bout wheels, cheers
Title: Re: vr6, wat bhp as standard
Post by: ...joe on 08 October 2005, 17:03
and the 2.9 corrado vr6 is 190bhp...........
Title: Re: vr6, wat bhp as standard
Post by: mix on 08 October 2005, 17:39
all for an extra 100cc
Title: Re: vr6, wat bhp as standard
Post by: Dizzie on 08 October 2005, 21:45
and larger throttle body ;)
Title: Re: vr6, wat bhp as standard
Post by: Rain on 08 October 2005, 21:46
passat VR6 was 2.8 (190bhp)
Title: Re: vr6, wat bhp as standard
Post by: Agreeable Slick on 09 October 2005, 00:38
passat VR6 was 2.8 (190bhp)

only ran 178 on RR at stealth ex misssus had one.
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 00:20
Passat had the same engine as the golf, 2792cc 128kw or 174bhp.
Corrado had 2861cc 140kw or 190bhp.
Title: Re: vr6, wat bhp as standard
Post by: Agreeable Slick on 11 October 2005, 04:44
errr so the mk3 16v had more horses than the VR, think not.

176 ish standard mk3 VR.
Title: Re: vr6, wat bhp as standard
Post by: A2VR6 on 11 October 2005, 04:48
I donÂ’t know if the US and UK VR6 2.8L engines are the same but this is what my car dynod last week to the wheel.

(http://web.vtc.edu/users/jwp02170/Dyno/VR6DynoRun3.jpg)

To the crank this is 195hp and 200ft-lbs of torque (using 18% from wheel to crank conversion).

Here is a list of mods/conditions:

-2.25" cat back exhaust

-Cone intake right on MAF sensor

-Deleted power steering

-Deleted AC

-87 octane (lowest you can get in the US)

-130k on engine

-Distributor and coil used for ignition, no coil pack (from a 1993 Passat)
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 13:42
errr so the mk3 16v had more horses than the VR, think not.

176 ish standard mk3 VR.

er no
the mk3 16v ABF lump produced 150bhp as standard.
Title: Re: vr6, wat bhp as standard
Post by: jv on 11 October 2005, 13:51
he knows that, read your previous post:

Passat had the same engine as the golf, 2792cc 128kw or 140bhp.
Corrado had 2861cc 140kw or 190bhp.

:grin:

:tongue:
Title: Re: vr6, wat bhp as standard
Post by: mix on 11 October 2005, 15:27
Passat had the same engine as the golf, 2792cc 128kw or 140bhp.
Corrado had 2861cc 140kw or 190bhp.

So your saying that the 16v is quicker than your vr6 :tongue: :tongue: :rolleyes:
Title: Re: vr6, wat bhp as standard
Post by: Overseer on 11 October 2005, 15:31
16v's rox0r :evil:
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 16:42
Just incase anyone didn't realise, 128kw = 174bhp  :laugh:
Title: Re: vr6, wat bhp as standard
Post by: Agreeable Slick on 11 October 2005, 18:28
Passat had the same engine as the golf, 2792cc 128kw or 140bhp.
Corrado had 2861cc 140kw or 190bhp.


errr in that case this quote you just did is complete rubbish then. So as i said a standard mk3 VR produces around the 176BHP mark. A 16v MK3 DOES NOT produce more power.
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 18:33
Alright little boy, don't get your knickers in a twist  :laugh:
Title: Re: vr6, wat bhp as standard
Post by: Agreeable Slick on 11 October 2005, 18:46
no worries beale.  :smiley:
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 19:04
beale with a bit more bite....  :laugh:
Title: Re: vr6, wat bhp as standard
Post by: ...joe on 11 October 2005, 19:19
whats the bite? a pickled egg?
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 19:22
nah mate i've got big fists  :grin:
Title: Re: vr6, wat bhp as standard
Post by: ...joe on 11 October 2005, 19:25
^^whats that got to do with engines?
Title: Re: vr6, wat bhp as standard
Post by: mix on 11 October 2005, 19:28
he can't fix them :laugh:

And i can vouch for it, mr6 is a vertically challeneged persoin :laugh:
Title: Re: vr6, wat bhp as standard
Post by: AudiA8Quattro on 11 October 2005, 19:37
beavis is in the house  :laugh:
Title: Re: vr6, wat bhp as standard
Post by: mix on 11 October 2005, 19:39
and butthead is talking :laugh: