GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: crazydog on 25 April 2017, 18:51

Title: wiring
Post by: crazydog on 25 April 2017, 18:51

hi guys i need to connect to an ignition fed source for a project,any ideas on what or where would be the easiest or best to find.all ideas welcome.   cheers.

Title: Re: wiring
Post by: itavaltalainen on 26 April 2017, 08:32

Why don't you use terminal 15 from the potential distributors in central electrics?
Install an inline fuse holder with appropriate fuse.

Title: Re: wiring
Post by: crazydog on 26 April 2017, 13:11

ok thanks excuse my ignorance where is terminal 15 are we looking at the main fuse box

Title: Re: wiring
Post by: Ajamesc on 26 April 2017, 18:45

Quote from: itavaltalainen on 26 April 2017, 08:32

Why don't you use terminal 15 from the potential distributors in central electrics?
Install an inline fuse holder with appropriate fuse.

Remove the trim above the pedals and there's a fuse bored at the bottom wear the relays are there's a few studs. One constant live ones ignition live

Title: Re: wiring
Post by: bgbazz on 26 April 2017, 19:06

Best and safest way to go.  :smiley:

Title: Re: wiring
Post by: crazydog on 01 May 2017, 19:20

ok thanks no prob panel came off easy as sugested wired into stud from ign.just as a matter of interest when i tested fir the ign stud i found the opposite end one had no live feed direct or ign,the others apart from the one i used from ign where all permanetly live. thanks again.