GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: hardmonkeys on 16 July 2016, 20:48
-
Since I've replaced the loom in my cabrio,I've had a problem with the speedo not working...and the fuel gauge not settling on a position...it goes up, then sprodically drops before going back up again...I'm not too concerned about that for now, it's speedo prob that is more important at the minute, I have checked VAGCom and nothing is coming up...
Been reading about a speed sensor on top on the gearbox? Is at the back?
(http://i107.photobucket.com/albums/m318/hardmonkeys/Mobile%20Uploads/image_4.jpeg) (http://s107.photobucket.com/user/hardmonkeys/media/Mobile%20Uploads/image_4.jpeg.html)
If so, mine spins...from the top, if I took the connector off, then I can spin it...?
Also, on top of that isn't a 10mm bolt, so maybe it's not..any ideas??
Thanks
-
Maybe that speedo is the problem. I cant remeber but Im sure theres a 19mm holding the top of the sensor I. So you can spin it off and see if its still in one piece
-
I'll have another look later, but the only thing that seems to be holding it in, is that thing in the middle of it.. Got a bloody shed to put up today, then back to work tonight...weekend goes to quick lol
-
True, from what I remeber of them gearboxes that top bit should be on a thread into the bottom bit of the sensor. 19mm or 21mm I think. Youd be able to feel it
-
Yes, you were right, I managed to get it off, the top bit came off, and I have a small square spindle inside,
The other bit, that the spindle went inside, was in the box...sound right? Will get pic tomorrow(later depends on which way you look at it(btw way, since my last msg I'm still up, I'm now at work on the night shift, so not only have i tried to fix the car, put a shed up and tidy the garage, I am also travelling to and delivering around London lol. Might get to bed around 6am)) i tried to remove it, but it wouldn't budge!
Sound right??
Thanks for your help
-
Yes mate sounds spot on. I think theres a 10mm holds the bottom bit in. Really cant remember. 5 years since ive taken a speedo sensor out
-
Does this look right?
https://imgur.com/R1SglPc
https://imgur.com/EIniufG
There doesn't seem to be any nut/bolt holding that in, I've tried to scrape away as much muck as possible.
I've also connected a drill to the spindle and recorded the speedometer unit in the car...nothing!
Tried using the previous cluster before I did engine swap, still nothing.
-
Cant see in the hole but the other piece looks correct.
If its not recording maybe its f**ked. Unless it has to be in gear. Shouldnt think so though
-
Have you put the speedo into test mode (yet)?
-
If this is the test mode,
https://www.gsfcarparts.com/community/index.php?topic=5964.0
then yes, I found this on Saturday whilst having a good scout around the Internet... When driving it doesn't register anything.
-
Not caught the wiring near the bell housing?
-
I had checked, but I was rushing about, will have another look later.
-
Took the shaft out, (didn't realise it was a screw in jobby) and was faced with this
https://imgur.com/a/AIhzI
Should it have an end on?
-
Investigated further
https://imgur.com/a/gWhSl
Ordered a new one from VW £4.75. Fingers crossed
-
End of speedo drive then?
On imgblur you want to copy the bbcode and the pics will come up instead of a link
-
Ok mate. Was using the app so will look the bbcode,
Thanks mate.
-
Changed the sensor today, and it works..price was not too bad either, £31 from VW.
Thanks for your help