GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Scott D on 09 April 2016, 21:41

Title: Neuspeed 28mm RARB
Post by: Scott D on 09 April 2016, 21:41

I have a Neuspeed 28mm RARB that am planning on cleaning up and eventually fitting

However a slight snag.. currently running a mk1 TT front arb that is only 19/20mm? and that combined with a fatter rear bar worried will cause rear end to be snappy. Used to have a Whiteline RARB on standard front ARB and that was perfect but given the TT is thinner than standard not wanting extreme amounts of lift off over steer fun as it is.

Has anyone had experience of a similar setup at all and how was it?

Do plan on fitting a 25mm front arb in due time but already got the rear bar taking up space here

Title: Re: Neuspeed 28mm RARB
Post by: andy68 on 21 April 2016, 21:38

Put it on the softest setting till you do the front. Furthest holes back for soft setting.

Title: Re: Neuspeed 28mm RARB
Post by: Scott D on 24 April 2016, 23:16

cheers wasn't sure which way put it at softest setting