GolfGTIforum.co.uk

Model specific boards => Golf mk7 => Topic started by: ajmoir36 on 17 July 2015, 18:15

Title: Fault codes no lights on...
Post by: ajmoir36 on 17 July 2015, 18:15
Just been out for a routine scan and have a couple of fault codes, that won't clear. Oddly though there is no light on.

 Address 01: Engine (J623-CJXC)       Labels: 06K-907-425-V1.clb
   Part No SW: 5G0 906 259 E    HW: 06K 907 425 B
   Component: 2.0l R4 TFSI  H13 0003
   Revision: --H13---   
   Coding: 091D00322466050B3004
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM20TFS0205G0906259E 001003
   ROD: EV_ECM20TFS0205G0906259E_VW37.rod
   VCID: 3065EB906BD754A1DEF-8065

1 Fault Found:
16452 - Implausible Data Received from ESP Control Module
          U0416 00 [047] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 5778 km
                    Date: 2015.06.12
                    Time: 07:22:52

Readiness: 0000 0000

 -------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379.clb
   Part No SW: 5Q0 907 379 M    HW: 5Q0 907 379 H
   Component: ESC           H31 0571
   Revision: 00000000    Serial number: 62444000000173
   Coding: 01FA93A15421296E037B070241C96980C92A94C0E08296F7F84250F8C208
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 033001
   ROD: EV_Brake1UDSContiMK100IPB_VW37.rod
   VCID: 4689AD48F953EA11143-8013

1 Fault Found:
4235 - Vacuum sensor
          C10A3 29 [137] - Signal Implausible
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 109
                    Mileage: 5778 km
                    Date: 2015.06.12
                    Time: 07:22:50
Title: Re: Fault codes no lights on...
Post by: itavaltalainen on 17 July 2015, 18:30
Where did you try to delete?
In Autoscan or in the individual control modules?
Title: Re: Fault codes no lights on...
Post by: ajmoir36 on 17 July 2015, 19:01
Both