GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Screech16v on 27 May 2015, 21:41

Title: 1.8t tuning
Post by: Screech16v on 27 May 2015, 21:41

May be a daft question but......  will an AUM small port intake including aum injectors which I believe are 318cc work with my agu,the injectors have the same plug ev6,agu are 205cc I think ,it seems like an easy way to get larger injectors before a stage two remap,this aum engine is broken and im seeing what I can utilise for free. thoughts anyone?

Title: Re: 1.8t tuning
Post by: Screech16v on 27 May 2015, 21:57

Adding to this I see the general opinion is a large port doesn't aid until you are running big numbers,is there any truth in this?
Would these seats fit in my agu manifold thus allowing me to fit the aum injector? cheers
http://www.ebay.co.uk/itm/GENUINE-SEAT-LEON-CUPRA-LCR-IBIZA-1-8T-INJECTOR-INSERTS-SET-OF-4-/181756878894?pt=LH_DefaultDomain_3&hash=item2a518de02e

Title: Re: 1.8t tuning
Post by: Wazzzer on 28 May 2015, 14:19

AGU runs different impedance through the injectors so no they aren't just plug and play unfortunately

Title: Re: 1.8t tuning
Post by: Screech16v on 28 May 2015, 23:05

POOP! Cheers wazzer,do you know what impedance I need ,14.5ohms by any chance?
Any thoughts on these?
http://www.ebay.co.uk/itm/191588121021?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Title: Re: 1.8t tuning
Post by: Chris. on 28 May 2015, 23:23

They wont work.

EV1? FAt stubby type.  Calibra yellows or saab reds.

Title: Re: 1.8t tuning
Post by: Screech16v on 28 May 2015, 23:35

Hi chris,so the ebay ones no good? I think they look too short and wont reach anyway without mods to the fuel rail or mani

Title: Re: 1.8t tuning
Post by: Screech16v on 28 May 2015, 23:41

Are these what I need?
http://www.ebay.co.uk/itm/Vauxhall-Redtop-C20LET-Fuel-Injectors-x-4-Yellow-0-280-150-420-Set-A-/201343306970?pt=LH_DefaultDomain_3&hash=item2ee0ff0cda

or

http://www.ebay.co.uk/itm/191586487647?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I have a vr6 maf and a vr6 tb if needed aswell as a pending remap all to work with the new injectors

Title: Re: 1.8t tuning
Post by: shaft69 on 29 May 2015, 08:32

Sure are.

Title: Re: 1.8t tuning
Post by: Wazzzer on 29 May 2015, 14:38

If you're sticking with the K03s I would probably say the yellows will be enough, K04 the reds. Best to check with whoever is mapping it first though...

Title: Re: 1.8t tuning
Post by: Screech16v on 03 June 2015, 19:50

Thanks guys,ive got a set of bosch reds on route,318cc same dimensions as agu direct fit