GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: BEELZEDUB on 16 May 2015, 09:29

Title: fault code help
Post by: BEELZEDUB on 16 May 2015, 09:29

just read the codes on my wifes mk4 1.8t agu code and got these codes on VCDS

00544 - maximum boost pressure exceeded 35-10 intermittent

00561 - mixture adaptation 14-00 adaptation limit (add) exceeded

00515 - camshaft position (hall) sensor (g40) 30-10 - open or short to plus - intermittent

had to fit a new turbo about 3 months ago and it has crazy surging almost like its hitting a rev limiter. if you back off the gas you can then drive it gently past the hesitation.

it had this problem when we bought this car about 4 years ago then on day the problem went, after looking at the fubar'ed turbo that came off i would say the boost was able to escape via multiple cracks in the exhaust housing so cured the over boost. now we have a new turbo genuine not cheap chinese one the problem is back and i dont want to break this one.

any ideas?????

this week the car has started to hunt on idle so rescanned and got the bottom 2 codes, so guess its either the sensor breaking down or bad wiring again any ideas???

thanks Mike.

Title: Re: fault code help
Post by: BEELZEDUB on 17 May 2015, 14:49

anyone?????

Title: Re: fault code help
Post by: baker1983 on 17 May 2015, 15:04

Triple check all vacuum lines!

Title: Re: fault code help
Post by: Wazzzer on 17 May 2015, 21:21

Have you cleared the codes and checked again?

Title: Re: fault code help
Post by: BEELZEDUB on 18 May 2015, 23:21

Quote from: Wazzzer on 17 May 2015, 21:21

Have you cleared the codes and checked again?

yes did that and they all came back again..