GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: gareth_iowc on 15 May 2015, 21:03

Title: golf mk3 handbrake pin out for remote start.
Post by: gareth_iowc on 15 May 2015, 21:03

Hi guys,

I'm fitting remote start to my golf and it wants a signal for when the handbrake is on.

I have a brown and brown and black.

Any one know off hand what is the triggered side the makes the light come on?

My volt meter is locked in at work until Monday :(

Title: Re: golf mk3 handbrake pin out for remote start.
Post by: LR5V on 16 May 2015, 16:35

Suspect I may be missing something, but the switch just makes the contact and therefore the circuit when the lever is raised
-so cant you connect into either cable and get a signal?

Just checked the Haynes wiring chart, the solid brown is earth and the Brown black is positive

Title: Re: golf mk3 handbrake pin out for remote start.
Post by: gazareth on 17 May 2015, 00:38

you will only get the full voltage on the + side of the bulb as when the power goes through the bulb which is basically a resistor it loses power to light and heat. if there was 12v coming out the -side of bulb we wouldn't need alternators :wink: