GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: welshvalver on 12 April 2015, 14:36

Title: ross-tech
Post by: welshvalver on 12 April 2015, 14:36

hay guys probably been asked before but which vcds do i need for my mk3 gti 8v. thinking of downloading it on my laptop.
cheers

Title: Re: ross-tech
Post by: vicciu on 12 April 2015, 16:53

It depends on which cable you bought. I bought a cheap 10$ cable and only VCDS Lite worked with it.

Title: Re: ross-tech
Post by: itavaltalainen on 12 April 2015, 17:49

You either need the Hex+Can interface if you want to use full VCDS on a mk3 or VCDS lite which will work with all KKL cables (some better than others) but that is limited in function unless you register it for 99$.

Title: Re: ross-tech
Post by: welshvalver on 23 April 2015, 22:10

cool chees guys i think il get the registerd one

Title: Re: ross-tech
Post by: itavaltalainen on 23 April 2015, 23:27

good choice for mk3.

btw what do you need it for?

Title: Re: ross-tech
Post by: N900 MJT on 24 April 2015, 10:53

There isn't a lot that you can really do on a mk3 with vagcom, but for fault checking of the engine the Lite version does just fine

Title: Re: ross-tech
Post by: VW BUSH on 25 April 2015, 13:38

Quote from: N900 MJT on 24 April 2015, 10:53

There isn't a lot that you can really do on a mk3 with vagcom, but for fault checking of the engine the Lite version does just fine

^^^^