GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Lucasprss on 26 January 2015, 22:22

Title: Gamma Radio change over to Single Din Headunit
Post by: Lucasprss on 26 January 2015, 22:22

Hi peeps, need some audio advice. I have just got myself my first golf GTI MK4 (115) 2001 (red and black interior) which has the standard Gamma Radio in and above it is an empty din unit.

I have a kenwood kdc-455u single din headunit to replace the gamma radio, do I need to buy additional wire harness for it / plastic housing for it aswell or should it just be a case of swap out.?

Any help is greatly received. Thanks

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: hardmonkeys on 27 January 2015, 02:34

Should be ok to swap over without additional housing, I *think* (as far as I can remember) you won't need any additional wring harnesses either, it's been a while since I did a radio change in a mk4...best thing to to remove the old Gamma unit and have a look at the wiring, easy enough to do

Hope that helps

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: Lucasprss on 27 January 2015, 06:35

Thanks for your reply, I'll remove the unit and have a look.

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: Dalo Harkin on 27 January 2015, 13:58

Its standard 2 block wire harness.

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: Lucasprss on 27 January 2015, 21:11

Standard two block harness is that Good.?

With aftermarket head units do I need to buy an ISO adaptor?

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: hardmonkeys on 27 January 2015, 21:34

No, the two block connector is ISO

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: dubber36 on 28 January 2015, 09:30

I'm pretty sure you'll need to swap the permanent and ignition lives over in order for the new radio to keep its memory.

It's easier to buy an adaptor lead which has bullet connectors on the red and yellow wires to enable you to do this, than it is cutting and soldering the cars existing wiring.

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: hardmonkeys on 28 January 2015, 14:18

Ahhh, good point, I stand corrected

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: Dalo Harkin on 28 January 2015, 17:14

I didn't change any wiring on mine and it remembers all the settings.

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: dubber36 on 28 January 2015, 17:36

Quote from: Dalo Harkin on 28 January 2015, 17:14

I didn't change any wiring on mine and it remembers all the settings.

Does it turn off in the same way when you take the key out?

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: viperjsy on 29 January 2015, 13:29

I just got the iso conectors when I did mine

Title: Re: Gamma Radio change over to Single Din Headunit
Post by: Dalo Harkin on 02 February 2015, 12:21

Yes