GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Sugar79 on 15 September 2005, 10:08
-
ive had this for ages
(http://i5.photobucket.com/albums/y197/Sweet_peas/Picture50.jpg)
mite actually give it ago wiring it in, can anyone suggest the best way to connect the wires up?? :sad:
i did think about crimping them with those plastic connectors but iam not sure how much wire i have to play with in the door, as iam not going to take the door card off. :undecided:
-
i think you'll find a good few inches of slack wire if you pull it up from the top, soldering would be best though.. but whichever way you connect, wrap it in plenty of insulating tape. dont want water dripping down your window onto the wires and buggering up your alarm.
-
dont want water dripping down your window onto the wires and buggering up your alarm.
you've scared me now lol :sad:
-
you'll be fine :cool:
-
yes but i alway bodge things up :embarassed:
-
I got one of these and they look great. Suprised how many people come up and ask about it. I didn't put mine in. I gave it to the guy who was putting in my clifford to do as he'd be removing panels. What he did say though is that it only works one way. So check your wires before you permenatly attach them. if it doesn't work one way, switch the wires and try it the other. I was going to run a wire over to do my passenger door too but not sure now. With the clifford in there is 3 flashing blue lights and looks like a disco as it is, so might just leave the passenger door.
-
i make and sell em to fit mk3's if any 1's interested, tenner a set....
(http://i14.photobucket.com/albums/a332/hardcor3_/ebaypics189.jpg)
(http://i14.photobucket.com/albums/a332/hardcor3_/ebaypics192.jpg)
-
mite actually give it ago wiring it in, can anyone suggest the best way to connect the wires up?? :sad:
i did think about crimping them with those plastic connectors but iam not sure how much wire i have to play with in the door, as iam not going to take the door card off. :undecided:
Good DIY here mate, and haven't I seen ya on UKMKIVs??
http://homepage.ntlworld.com/dgace/door_led_mod.htm
-
^^^^ yes you have lol :cool:
-
where do i get one of these blue leds??
Harcor3 if you do em in blue let me know im poppin to mabo i think sometime tomorrow, if youve got any kickin about ill call in and have one off yas
:cool:
-
i'll source a pair of blue l,e,d's and build you a set, the surrounds are only about 30p each, i mostly built em for mk3's so don't have any surrounds in for Mk4, but any more orders, pm me, and if i get enough interest, i'll get a sh!t load and build any1 a set, i charge a tenner a pair, not per side as on flee-bay.. :wink:
-
sounds good to me bud, let me know when yas have a pair and ill nip over and get em :smiley: i take it to get the one on the passenger door to work ill have to run wires from the drivers side door??
:smiley:
-
Apparently there is some wires in the passenger side door that can be picked up, Its just a case of findind out which ones.
I found out this after i ran mine from the drivers side. :rolleyes:
-
handy to know!!!!! ill see if i can suss it out!!
:cool:
-
Here you go, Don't quote me on it as i haven't tried it.
The positive connection (green with a lilac stripe) has to go into pin 26 on the passenger side electric window connector, the earth wire (brown with a blue stripe) has to go to ground, before connecting the led a simple way to test this is to put a wire into pin 26 and connect a multimeter to it , when you arm the alarm there should be a constant or flashing 12v supply when armed!!
-
i jumped both mine, off me dash alarm l,e,d, now i get all 3 flashing at the same time, looks well trick and belled to the max.... :laugh: :laugh: