GolfGTIforum.co.uk

Model specific boards => Golf mk5 => Topic started by: Dipesh2031 on 11 October 2014, 14:52

Title: will a 20.7mm bushing fit a 21.7mm roll bar. (Mk5 GTi rear arb)
Post by: Dipesh2031 on 11 October 2014, 14:52

Hi guys,

As with the title, will the smaller bushing fit the roll bar, looking everywhere all I can find are these bushings for the mk5, someone told me, they need to be slightly smaller so that they grip the bar... Don't know if any of this is true.

The kit in question:

http://www.ebay.co.uk/itm/VW-Golf-MK5-2-0-GTI-Hatch-Variant1-Febi-Rear-PROKIT-Anti-Roll-Bar-Bush-Kit/291258407682?_trksid=p2054897.c100204.m3164&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3D96318fd92762400d89efb9b28585e8dd%26pid%3D100204%26prg%3D20140407115239%26rk%3D6%26rkt%3D20%26sd%3D291203090387

Any help appreciated

Thanks guys

Title: Re: will a 20.7mm bushing fit a 21.7mm roll bar. (Mk5 GTi rear arb)
Post by: boneybradley on 18 October 2014, 19:29

If your 21.7mm that kit won't fit and will give play in the a.r.b as it wont clamp it tight.
Febi do a correct sized kit like you listed (For PR number: 0BF Stabiliser Diameter: 21,7 fitting side   rear axle both sides - inside diameter 1   17 - inside diameter 2   19)

I sell those for £24.26 (febi pro kit) free p&p (I deal with lots of febi parts but even that one is not listed on my website, I can guess finding them wasn't easy!)

oh my website is http://oemandmore.co.uk/golf-mk5-1k-136-c.asp (http://oemandmore.co.uk/golf-mk5-1k-136-c.asp) if you need anything else (or message me on here if you can't find what you need)

Title: Re: will a 20.7mm bushing fit a 21.7mm roll bar. (Mk5 GTi rear arb)
Post by: Dipesh2031 on 27 October 2014, 03:02

sent you an email, thanks for your help will order a kit from you asap!