GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Mk2_tel on 12 September 2014, 09:49
-
I have a small steering wheel but I have put the resistor in
I have fitted Audi s3 interior which have airbags so not sure how I turn light off
-
depends on what the actual fault codes are?
-
you need VAG COM to turn the light off once the fault is logged
-
I used a 5w 2.2ohm resistor on the steering wheel and it worked but you need vagcom to turn the light off after you fit it
-
Mine says airbag tensioner?
Do I need to solder into the loom under the seats???