GolfGTIforum.co.uk
General => The garage => Topic started by: Tomonator1985 on 09 August 2014, 10:45
-
Hi,
I can find loads of threads on basically "how to ignore the red flashing temp light" BUT i wanted to check what is realllllly means apart from high temp before i ignore it or change the sensor.
Light flashes from start up so it can;t be heat related.
Anything else it could be?
Cheers already:)
-
talking about a mk2 are we?
could be low coolant warning (or faulty/dirty electrodes in the expansion tank), not sure the mk2 had that already, my mk3 certainly did.
could be faulty temp sender but you can check that with a multimeter easily. i posted a guide in mk3 section few times, the temp/resistance curve on a mk2 is pretty similar but you may still have two separate senders depending on engine
-
coolant is fine. may just give it a good clean then see how it is. then fork out the mighty £4 for a new sensor!
cheers!
-
I have this on my mk4 on start up, I just assumed it was telling me my engine is cold. :laugh: