GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: sharki786 on 22 June 2014, 15:02

Title: rad fan 4 pin to 3 pin connector
Post by: sharki786 on 22 June 2014, 15:02

I had the 4 pin rad fan loom but the twin fans i have put on are 3 pin so we cut the connector off and wired it up as 3pin. Now the fans aint kicking in nor is the aux water pump. Either as the car is only started and not driven on the road or there is a problem. Now i want to know if the plug has been wired in right

(http://i323.photobucket.com/albums/nn458/shako786/20140622_144501_zpsllfmnqvg.jpg) (http://s323.photobucket.com/user/shako786/media/20140622_144501_zpsllfmnqvg.jpg.html)

also there is 2 red/green wires. We used the thin red/green wire not the thick one.
could someone confirm if its connected up right

Title: Re: rad fan 4 pin to 3 pin connector
Post by: sharki786 on 23 June 2014, 08:47

Anyone?

Title: Re: rad fan 4 pin to 3 pin connector
Post by: sharki786 on 23 June 2014, 18:44

 :huh:

Title: Re: rad fan 4 pin to 3 pin connector
Post by: sharki786 on 24 June 2014, 12:49

Someone must know???