GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Jgomk4 on 11 June 2014, 18:40

Title: Agu ko4 swap
Post by: Jgomk4 on 11 June 2014, 18:40

Hi Iv just fitted a ko4 from a audi tt 225 but I need injectors to fit my agu inlet manifold. Which ones will fit??

Title: Re: Agu ko4 swap
Post by: kier1990 on 11 June 2014, 21:47

Ow mate ur in the same situation as me I'm doing a ko3 hydrid turbo conversion just so u know vr6 maf is perfect and I think saab redtop injectors are good depends on bhp I bought s3 injectors because got told they will fit but they don't

Title: Re: Agu ko4 swap
Post by: davidgtrr34 on 11 June 2014, 22:35

I am using these and there working great. There able for 480bhp 100% duty cycle

http://www.ebay.co.uk/itm/Volkswagen-Jetta-Golf-GTI-1-8t-550cc-Injectors-550-cc-/160284586274?pt=Motors_Car_Truck_Parts_Accessories&hash=item2551b4b122

Title: Re: Agu ko4 swap
Post by: Dalo Harkin on 12 June 2014, 12:40

Quote from: davidgtrr34 on 11 June 2014, 22:35

I am using these and there working great. There able for 480bhp 100% duty cycle

http://www.ebay.co.uk/itm/Volkswagen-Jetta-Golf-GTI-1-8t-550cc-Injectors-550-cc-/160284586274?pt=Motors_Car_Truck_Parts_Accessories&hash=item2551b4b122

they look like the S3/TT ones, they are smaller, you need the larger ones like Calibra yellows or Saab reds

Title: Re: Agu ko4 swap
Post by: kier1990 on 12 June 2014, 13:15

Is it possible to get s3 injectors to fit agu inlet as already bought them if possible how much work ?

Title: Re: Agu ko4 swap
Post by: Jgomk4 on 12 June 2014, 14:07

Thanks for all your replies Iv gone for saab reds. The only other thing is my down pipe Iv got a 3in leon cupra mk1 down pipe as told by miltek that this will work. Hope it does it cost a nuff.

Title: Re: Agu ko4 swap
Post by: Jgomk4 on 15 June 2014, 19:00

Audi tt maf!! Do I use just the casing and use my sensor from my agu engine or the complete maf? Tanks guys

Title: Re: Agu ko4 swap
Post by: Wazzzer on 15 June 2014, 19:40

You don't use an Audi TT MAF on an AGU, you use the Golf VR6 MAF and it's just the casing with your standard AGU sensor

Title: Re: Agu ko4 swap
Post by: rio_gti on 15 June 2014, 20:08

I got a bora v5 maf to go on that's also 80mm  :wink:

Title: Re: Agu ko4 swap
Post by: Jgomk4 on 16 June 2014, 16:39

So I can't use the tt maf casing then?? As it came with turbo and that don't want to waste it. Mk1 lcr down pipe will it fit my mk4??thanks

Title: Re: Agu ko4 swap
Post by: Wazzzer on 16 June 2014, 19:20

rio your MAF plug is different to the AGU plug

Title: Re: Agu ko4 swap
Post by: rio_gti on 16 June 2014, 20:17

Uh ohh I better check this out  :rolleyes:

Cheers for the heads up

Title: Re: Agu ko4 swap
Post by: Jgomk4 on 16 June 2014, 20:44

So Iv un wrapped my down pipe to fit to my mk4 ko4 it made for a lcr mk1 will it fit before I strip it all down and find out it don't thanks

Title: Re: Agu ko4 swap
Post by: rio_gti on 17 June 2014, 09:01

Quote from: Wazzzer on 16 June 2014, 19:20

rio your MAF plug is different to the AGU plug

My maf plug fit straight onto the bora V5 maf.... So does this mean I don't need to use my old sensor out of my original maf?

Title: Re: Agu ko4 swap
Post by: Wazzzer on 17 June 2014, 12:44

I think you can use the same sensor