GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Boufon on 04 June 2014, 16:49
-
Hello!
Can anyone help me with some info please:
I recently put a 16v engine into an 8v GTI complete with bay loom & had to disconnect the aircon to do the swap. A thread on the condenser was damaged so I have only now come to replace it & fix the system but I have realised there are no aircon wires on the 16v engine bay loom!!
I hope it should be straight forward (fat chance!!) as the car originally had aircon so all the switches & stuff in the cockpit are present & correct.
From the fusebox however, there is no "Plug N". I think I'm correct in saying this is the 6 pin, slim green plug for the aircon system. In the engine bay I have a 2 pin plug on the aircon motor & a 4 pin plug on the pressure switch both with no wire to plug into them.
Can anyone who knows fill in the gaps for me please?
Failing that can anyone with aircon on a mk3 have a root round under their bonet for me please:
1) Where do the wires from the aircon pump go to? & what colours are they?
2) Where do the wires from the pressure switch come from? & what colours are they?
3) Where do the wires from the green "Plug N" go to & what colour is on which pin?
Any help is appreciated as I cannot find any relevant dicussions anywhere for this.
Many thanks,
Ross.
-
Really, No one at all?? :sad:
-
message me with your email and I will send a you full wiring diagram (with air con section)
-
PM sent - Thanks very much!