GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Scott D on 03 June 2014, 21:25

Title: Raising Front Coilovers - AP
Post by: Scott D on 03 June 2014, 21:25

Need to raise the front coilovers as its down way too much and causing issues when turning with tyre catching on arches - looks awesome but totally impractical scraping.

Never had coilovers before but guessing they are adjusted loosing grub screw then turning clockwise up towards the top of strut.

They are AP's that are fitted

Cheers

Title: Re: Raising Front Coilovers - AP
Post by: davidgtrr34 on 03 June 2014, 21:47

Spid the rings at the bottom of the spring up to go up and down to go down. Make sure there tight when your finished because they can go down again if loose.

Title: Re: Raising Front Coilovers - AP
Post by: Scott D on 03 June 2014, 22:12

sounds easy enough will make sure they are tight!

cheers bud

Title: Re: Raising Front Coilovers - AP
Post by: Scott D on 04 June 2014, 21:41

all sorted with a wire brush and plenty of WD40

what a difference not scraping when on full lock  :grin: