GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: davemk4 on 25 May 2014, 12:57

Title: trying a ecu swap cant even find my ecu pin help
Post by: davemk4 on 25 May 2014, 12:57

So got vcds etc and trying to a ecu swap same engine etc and is a used ecu. Got the walkthrough where to put the pin from original into new but where on earth is the pin been at this for 2 hours now lol

Title: Re: trying a ecu swap cant even find my ecu pin help
Post by: Chris. on 25 May 2014, 13:31

need vag tacho.  Pin is stored in the ECU and the cluster.

You need the PIN (SKC) from the ecu your replacing it with or you'll have trouble.  Pretty hard to get too for immo 3 if thats what your running.

Title: Re: trying a ecu swap cant even find my ecu pin help
Post by: davemk4 on 25 May 2014, 14:35

Immo2

So get pin from clocks then adapt the new ecu with the pin from clocks

Title: Re: trying a ecu swap cant even find my ecu pin help
Post by: Chris. on 25 May 2014, 14:42

Don't even need skc on immo 2 clocks.  Look on ross texh for immo 2 coding.  Set a value in ecu to 1 and it'll learn itself.

Title: Re: trying a ecu swap cant even find my ecu pin help
Post by: Chris. on 25 May 2014, 14:49

http://wiki.ross-tech.com/wiki/index.php/Immobilizer_II_ECU_Swapping

Title: Re: trying a ecu swap cant even find my ecu pin help
Post by: davemk4 on 25 May 2014, 15:01

Im assuning it immo2

Im 2001 AUM y reg?