GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Blue MK2 on 19 October 2003, 23:08
-
My heater gets hot instantly wich is good.
But........
After a few minutes the heater slows down and then cuts out.
Then.....
when i go over a bump after about 5 mins the heater come back alive again ???
when the heating slows down it makes a rough noise which sounds like a 'nakkerd' motor?
Any clues?
-
The bearing in the motor has gone maybe ? may need a new blower unit, about 200 bar i think.
-
FLIPPIN EKK! ABOUT 200 BIG ONES? IS THIS ITEM EASY TO NIK FROM THE SCRAPPY? LOL :o
-
Where is this dodgy item located? Is this the item in the engine bay under the black plastic cover?
-
Do you mean the blower stops working completely? if so check the electrical connections. If you need a to replace it then a scrappy is worth a try.
-
i half-inched one out of the scrappy!! as the bearing in mine had gone causing it to make a nice whirring sound
they are located below the glove box, you need to take of the plastic tray then you'll see it on the left.
to remove it, there is a clip at the back of it, u a screwdriver to undo the clip, then rotate it anticlockwise and it should come out
if yours just stops & starts then its probably just a loose connection
-
do u even have to take that shelve out under the glove box? I think with mine it's just a unscrew and remove. Knowing me I've left out some screws and clips in a previous fix. ;D