GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Scottymk4 on 10 May 2014, 13:22
-
Time to change the spark plugs on my 1.8t agu, what kind are you
Guys using
-
take 1 out of your car see whats in there an replace with the same :smiley:
-
Haha Barry was wanting to know what makes people were using :grin:
-
just using the standard plugs in my 1 8t ngk PFR6Q engine is AUM dont know if that matters they are pretty expensive but got a longer life than similar cheaper copper plugs
-
I use NGK7s, they're copper and won't last as long as the platinums but they conduct a spark better and are only £8 a set
-
Where from wazzer ?
-
eBay , I think there was a post about it, here:
http://www.golfgtiforum.co.uk/index.php?topic=265309.msg2439174#msg2439174
-
Cheers Brian are these ok for agu engine
-
yes I run them in mine mate. Just make sure they're gapped properly before you put them in
-
Cool I will order some :grin:
-
I am using nkg bkur6et-10 thay where the same as the ones that I replaced
-
I ran NGK's in mine all ok.
-
Ordered some of the ngk's... What gap do they need to be set to?
-
these nkg bkur6et-10 u don't need to
-
Just chucked some PFR6Q in my AUM after changing rocker gaskets, car runs sweet as a nut now..
-
Cheers Brian are these ok for agu engine
Yer I ve been running in my agu too just gap them ,
-
what gap do i need to set for them?
-
I used super bosch (rubbish). Moved onto NGK7's...noticable difference.