GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: markymarkg on 30 April 2014, 17:55

Title: AGU ECU swap.
Post by: markymarkg on 30 April 2014, 17:55

Got my hands on a supposed mapped ECU for my AGU 1.8t.

I know it will plug in fine but what would i need to do so the engine would run with this unit.

Cheers.

Title: Re: AGU ECU swap.
Post by: barrym381 on 30 April 2014, 18:50

get the immobiliser turned off on the ecu or have your key coded to it  :smiley:

Title: Re: AGU ECU swap.
Post by: Wazzzer on 30 April 2014, 20:31

do you know the part numbers of either?

Title: Re: AGU ECU swap.
Post by: topher on 30 April 2014, 20:38

you can do it with vagcom with those ecus. no need for any login codes its a simple adaption takes 2 minutes.

Title: Re: AGU ECU swap.
Post by: Chris. on 20 May 2014, 01:14

as above.  info is on ross techs site under IMMO 2 instructions.

Title: Re: AGU ECU swap.
Post by: tonysgti on 20 May 2014, 09:25

Where abouts are u?

Title: Re: AGU ECU swap.
Post by: markymarkg on 08 February 2015, 13:26

Glossop, just outside manchester.

Title: Re: AGU ECU swap.
Post by: Perryd84 on 09 February 2015, 10:25

I had one of those. It's literally just plug and play as long as you got one with the immobiliser turned off.

Title: Re: AGU ECU swap.
Post by: benmanc on 09 February 2015, 20:38

Doesnt that leave the car far less secure with it turned off?

Title: Re: AGU ECU swap.
Post by: barrym381 on 09 February 2015, 20:48

Quote from: benmanc on 09 February 2015, 20:38

Doesnt that leave the car far less secure with it turned off?

saves them breaking in to your house for the keys  :angry: as that's what happens these days

Title: Re: AGU ECU swap.
Post by: Wazzzer on 10 February 2015, 19:14

you don't even need the immo turned off to swap them over on the AGU