GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Gti5382 on 14 April 2014, 13:33

Title: Nut holding drive shaft in hub
Post by: Gti5382 on 14 April 2014, 13:33

1999 GTI 1.8 T
Is the star nut loosened clock or anti? Will a standard socket fit? if so what size?
What dictates whether bolts inboard holding shaft/joint are M8 or M10? Are they hex or star or torx?
Need to replace inner boot.

Many thanks.
Steve.

Title: Re: Nut holding drive shaft in hub
Post by: davidgtrr34 on 15 April 2014, 12:58

Outside nut is 30 and loosens counter clockwise. The inside ones are m10

Title: Re: Nut holding drive shaft in hub
Post by: Gti5382 on 15 April 2014, 23:19

Thanks for that.

Title: Re: Nut holding drive shaft in hub
Post by: beppe2672 on 17 April 2014, 22:18

Mine needed a bi-hex 30mm socket