GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Scottymk4 on 06 April 2014, 10:26
-
I have a very weak flow of water from screenwashers, tried replacing the pump which seems to have made it worse.. I did notice on the old one someone had warped tape around the part that
Goes into the washer bottle. My question is car you replace the tuber grommit thing on the bottle? Or do I need a new bottle.
-
bottles are easy enough to replace if they are the smaller one, it's the bigger one that's a nightmare to fit. Not sure if the rubber grommet is a replacement part, will have a look on ETKA for you in a mo
-
Thanks wazzer, think it's the big one, how strong is the flow on mk4 golfs cause mine only goes about 2 inches up the screen.. Is the pump a part the is prone to failing
-
does your car have washer jets for the headlights :smiley:
-
No Barry and the boot washer didn't work either. Lol
-
No Barry and the boot washer didn't work either. Lol
prob a small bottle then you have :smiley:
-
On another note Barry do you know any good places to get some bits sprayed? Need my wings and boot done to get rid of rust
-
On another note Barry do you know any good places to get some bits sprayed? Need my wings and boot done to get rid of rust
know a few places but they are expensive we just got another tailgate for a mates car so your best bet is to buy panels the same colour as your own :smiley:
-
Yeah that was my plan but indigo blue seems to be hard colour to get, although managed to get one wing yesterday but not as good a condition as I would like
-
Yeah that was my plan but indigo blue seems to be hard colour to get, although managed to get one wing yesterday but not as good a condition as I would like
stick a couple of wanted ads on the forums although i seem to be having trouble finding a passenger door for the 3 door i bought the other night :wink:
-
I was quoted £200 a couple of moths ago to fix and paint the ones that are on the car, not sure if this would be better than getting other parts that will prob rust anyway. Lol
-
I was quoted £200 a couple of moths ago to fix and paint the ones that are on the car, not sure if this would be better than getting other parts that will prob rust anyway. Lol
that would be better if your stuff is not bad :smiley: who quoted you for that
-
It's a small place over in kinning park
-
It's a small place over in kinning park
if you have seen some of there work and its decent then it might be a good shout as second hand panels will cost you a big note :smiley:
-
Yeah, my mate got some bits done and seems like a good job, the wing I got yesterday only
Cost me £10 but as I said isn't mint
-
Yeah, my mate got some bits done and seems like a good job, the wing I got yesterday only
Cost me £10 but as I said isn't mint
prob worth getting it done if your keeping the car or just run it till it dies then break it :wink:
-
is your car 3 or 5 door :smiley:
-
3 door
-
3 door
take it the wing came from the 5 door breaking on ebay thats local :whistle:
-
(http://i770.photobucket.com/albums/xx343/scottymk4/golf1_zpsfd7858bb.jpg) (http://s770.photobucket.com/user/scottymk4/media/golf1_zpsfd7858bb.jpg.html)
This is my car
-
No it didn't... Do you have a link for it though?
-
did your car come from ayrshire :smiley:
http://www.ebay.co.uk/itm/GOLF-MK4-GTI-V5-TDI-INDIGO-BLUE-FRONT-N-S-DOOR-/181180475653?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AGolf&hash=item2a2f32a905
-
Yeah
-
Yeah
nearly bought it but was to lazy to go see it :laugh:
-
The guy brought it to anniesland for me to see... It's a good car but bit rough round the edges, spent £500 on it so far now wanting to sort bodywork/ interior
-
The guy brought it to anniesland for me to see... It's a good car but bit rough round the edges, spent £500 on it so far now wanting to sort bodywork/ interior
he never offered to do that for me :grin: im 2 mins from there
-
Me too I'm in milngavie , his mum stays in knightswood
-
Me too I'm in milngavie , his mum stays in knightswood
:grin: thats closer again
-
Where abouts you from ?
-
Where abouts you from ?
partick but moved to yoker a few years ago :smiley:
-
Cool, do u use the Scrappie in yoker much ?
-
Cool, do u use the Scrappie in yoker much ?
not been in for ages might see if they have a 3 door black mk4 in now that you mentioned it :wink:
-
Your black golf looks nice, you still got the blue one too ?
-
Your black golf looks nice, you still got the blue one too ?
yes only bought the black 1 for the headlights for the blue car but think i will keep the black 1 till it dies now as its not bad condition and has had loads of work done :smiley:
-
You bought a full car for headlights... Wow... How much it cost you if you
Don't mind me asking?
-
You bought a full car for headlights... Wow... How much it cost you if you
Don't mind me asking?
a little bit more than you have spent on yours since buying it :wink:
-
Good price, what needs done to it... Apart from door :tongue:
-
Good price, what needs done to it... Apart from door :tongue:
wing mirror a couple of coil springs and timing belt but i get stuff like this done very cheap just the cost of bits :wink: plan was to just take lights and break it but it drives great now coil springs are done :smiley:
-
The body work looks mint... Let me know if you decide to sell :laugh:
-
The body work looks mint... Let me know if you decide to sell :laugh:
its far from mint mate :whistle:
-
Just managed to get a boot lid for mine for £40 posted :grin:
-
Just managed to get a boot lid for mine for £40 posted :grin:
from that 1 on ebay :wink:
-
Na from a guy on Facebook. Lol
-
Na from a guy on Facebook. Lol
if you need a hand fitting it a am 2 mins from you :smiley:
-
Cheers Barry, might take you up on that.. Will let you know when I get it
-
Cheers Barry, might take you up on that.. Will let you know when I get it
ok :smiley: