GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: 1.8Tgolf_Chris on 06 March 2014, 18:27
-
Golf mk4 1.8t AUM
Im going to fit my s2000 cone filter soon But i need to fit a small breather filter to put onto the secondary air pipe end
Ive been to my local stores and all i can find is universal breathers, anyone got some suggestions how to fit one on sure there is someone else that has fitted it :smug:
another thing when i temp fitted the cone filter, I got alot more turbo sound and more "dump" noise but it seemed to be quite random, sometimes its very noticeable others it doesnt sound at all.. could this be down to a boost leak or something?
-
Firstly get rid of that SAI, not needed, less pipes
Secondly the sound you're hearing is probably right but can also mean holey than thou pipes so would probably do with a refresh tbh
-
Firstly get rid of that SAI, not needed, less pipes
Secondly the sound you're hearing is probably right but can also mean holey than thou pipes so would probably do with a refresh tbh
suppose i could just remove the SAI then at least i would not need a breather for the pipe, but on the other hand it doesnt do any harm it being there ?
-
Suppose not but it is a pain with the extra loud noise on start up
-
If you have a decat then the SAI is not needed.
if you have a standard cat or even a sports cat the SAI is designed to pre warm the cat to prevent damage.
I have a 200 cell sports cat and I removed my SAI just after it was fitted :grin:
-
back to the point of.. fitting a breather :rolleyes:
-
Sorry for thread jacking but the AGU doesnt have this does it??
-
nope
-
Still havent figured out a way to fit something to this sai pipe, Ive just bodged a universal breather in it having wraped loads of ducktape around the breather neck to squeeze into the pipe so its not moving, But would prefer a better solution :angry:
-
Get a reducer
-
Get a reducer
got it sorted now jon, managed to get a 25mm tube on it after i removed the plastic ring on the end