GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: viperjsy on 06 March 2014, 13:54

Title: decat question
Post by: viperjsy on 06 March 2014, 13:54: hi would this
http://www.ebay.co.uk/itm/NEW-VW-GOLF-MK4-GTI-1-8T-3-STAINLESS-DOWNPIPE-DE-CAT/310336528828?_trksid=p3984.c100052.m2206&_trkparms=aid%3D222006%26algo%3DSIC.FITP%26ao%3D1%26asc%3D20140127092945%26meid%3D5294728729671878452%26pid%3D100052%26prg%3D20140127092945%26rk%3D3%26rkt%3D4%26sd%3D140469364603 fit an agu gti 1.8t 1999
Title: Re: decat question
Post by: GTi_James on 06 March 2014, 14:02: ...yes...no...maybe...i dont know...but that fit My AUM with 2 sensor holes and both had bolts in them so i could block one up
Title: Re: decat question
Post by: daz veedub on 06 March 2014, 21:50: I have the same sat in my garage ill let u know once its fitted on my agu, mine has to holes both with bolts in so if not both needed then the other can be left blocked
Title: Re: decat question
Post by: Wazzzer on 06 March 2014, 23:27: yes it will fit, I have one on mine. You will need to cut off the last section and buy a pipe to extend the downpipe if you are fitting this to an aftermarket (2.5") system though as it steps down to 2.25" for the standard system
Title: Re: decat question
Post by: joshstanvw on 07 March 2014, 20:46: Quote from: Wazzzer on 06 March 2014, 23:27
yes it will fit, I have one on mine. You will need to cut off the last section and buy a pipe to extend the downpipe if you are fitting this to an aftermarket (2.5") system though as it steps down to 2.25" for the standard system
What size section of pipe is needed is it 2.5" internal or external that would be needed
Cheers
Title: Re: decat question
Post by: viperjsy on 08 March 2014, 19:46: hi it is to fit a standard exhaust
any chance of a pic of it fitted to a standard exhaust please
Title: Re: decat question
Post by: daz veedub on 08 March 2014, 20:07: Should fit stright to standered exhaust pipe
Title: Re: decat question
Post by: GTi_James on 08 March 2014, 21:17: ok, i have had this pipe and welded a APR sports CAT into the second part that has the reducers.

this will fit AGU and AUM no probs, need new gasket

its 3inch to 2.5inch, the miltek this feeds into is 2.75 and fits perfectly

should not have any issues with this
Title: Re: decat question
Post by: Wazzzer on 09 March 2014, 00:28: Quote from: joshstanvw on 07 March 2014, 20:46
Quote from: Wazzzer on 06 March 2014, 23:27
yes it will fit, I have one on mine. You will need to cut off the last section and buy a pipe to extend the downpipe if you are fitting this to an aftermarket (2.5") system though as it steps down to 2.25" for the standard system
What size section of pipe is needed is it 2.5" internal or external that would be needed
Cheers

2.5" internal one end, 2.5" external the other. I just bought a 500mm section and cut it down