GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: JMK3 on 05 March 2014, 15:17
-
Hi guys
Im just finishing up a heater matrix replacement but now my heating doesnt work? i turn the switch to turn it on but nothing happens, dont even hear the motor start up.
Reluctant to pay for a replacement part if im not 100 percent itll fix it, any ideas? cheers
-
Something not connected, fuses, resistor?
-
Have you fully filled the system? Made sure there are no airlocks?
-
That wouldn't stop the fan spinning though would it?
-
matrix replacement is a dash out job.... sure you put in the control cables correctly?
-
the plug that goes in to the resistor in the blower motor housing isnt plugged in anywhere on the other end. Anyone know where to plug it?
-
Something not connected, fuses, resistor?
think this may be the cause, the motor isnt getting any power. any idea where the other end plugs in?
-
Big brown connector block???? :undecided:
-
Big brown connector block???? :undecided:
Its a white one thats not plugged in
-
I meant there is a big brown connector block where a lot of things join up to.
But if you are now saying its a white block connector I'm afraid I have no idea!
I would suggest speaking to Boneybradley but he may not respond to a PM at the moment as he is sunning himself!
-
I meant there is a big brown connector block where a lot of things join up to.
But if you are now saying its a white block connector I'm afraid I have no idea!
I would suggest speaking to Boneybradley but he may not respond to a PM at the moment as he is sunning himself!
Ok mate, its the one thing i didnt take a picture or make a note of and its pretty much the reason i did it in the first place.
anyone have any idea how much a garage would charge if i took it to them to plug in?