GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: adriangtiturbo on 04 March 2014, 14:20

Title: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: adriangtiturbo on 04 March 2014, 14:20

really need some help to find the best way to thread the vac hose from my engine bay to the boost guage in car. carnt find a hole any where.

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: brewey on 04 March 2014, 15:48

There's a few ways use the bonnet release grommet on the drivers side, or there is the from it behind the glovebox/ pollen filter.

Have a search there's loads of threads on how to fit one. Just remember whatever hole you use it needs sealing!!

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: Wayne on 04 March 2014, 21:46

Be carefull with the bonnet cable grommet it can leak afterwards.

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: sharki786 on 04 March 2014, 22:25

I did non of the above. I fed the hose from the pass side. If you look on the right hand side (pas side) of engine bay you will see a loom going into a rubber gromet. I used a metal wire clothes hanger to feed the cable through. Just be carefull not to pierce any wires or anything else.

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: adriangtiturbo on 06 March 2014, 15:35

cheers for help but still struggling. think im getting thick as i get older.lol. :laugh:

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: WadGTI on 06 March 2014, 16:31

Run it up the side of the windscreen and leave the drivers window open slightly  :grin:

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: 1.8Tgolf_Chris on 06 March 2014, 16:46

Quote from: WadGTI on 06 March 2014, 16:31

Run it up the side of the windscreen and leave the drivers window open slightly  :grin:

+1 yolo

Title: Re: can any one tell me the best way to thread the vack hose from engine bay to boos
Post by: adriangtiturbo on 08 March 2014, 10:26

Quote from: WadGTI on 06 March 2014, 16:31

Run it up the side of the windscreen and leave the drivers window open slightly  :grin:

did think about doing that