GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Len on 02 March 2014, 10:37
-
The Two, I would guess earth type connectors as shown if photo below
(http://i176.photobucket.com/albums/w170/Len405/Connectorsandbolts002_zpsf9664b30.jpg) (http://s176.photobucket.com/user/Len405/media/Connectorsandbolts002_zpsf9664b30.jpg.html)
They are part of the loom that goes round the back of the head right next to the black connector (in photo) that attaches to the Dizzy (underneath)
-
I do have this little bracket that I think goes on the back of the head that an earth strap from the scuttle gets bolted to.
Is this where those two connectors go as well??
(http://i176.photobucket.com/albums/w170/Len405/Connectorsandbolts008_zps93331d2f.jpg) (http://s176.photobucket.com/user/Len405/media/Connectorsandbolts008_zps93331d2f.jpg.html)
-
Still cant see how that bracket fits onto the back of the head! :angry:
-
Len phone me
-
Wont be back on it until Saturday morning.
Depends if engine turns with that spare end cap on and dizzy secured, as I may have to get the broken one welded.
-
Still not sure about these little spade connectors! Only place they CAN go is on the dizzy bolts, one either side, they wont stretch to anywhere else!
-
Go with that then.
-
Will have too! But certainly cant remember them coming off there!