GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: sharki786 on 21 February 2014, 08:15
-
What size did you get?
Was there loads of cutting?
Did you get the pipes with it?
How did the hoses fit?
Thinking about going to him today and buy a fmic so need to know before i splash out over £150
-
Just been to toyosport. Not being funny but i couldnt understand a word he was saying (he was chinese) and i told him the size i need and he said if not in book then he closed door lols :evil:
-
Wtf!?
-
Just been to toyosport. Not being funny but i couldnt understand a word he was saying (he was chinese) and i told him the size i need and he said if not in book then he closed door lols :evil:
:grin: :grin:
-
Funny thing is that he was smiling at me lolss :grin:
-
guys i need help!!! :cry:
im going to be buying a fmic. tops i have is £250 i dont want to do too much hacking. i know i need the inlets & outlets @ 2.5". i have read prawnys thread about an ic but i cant seem to find the right type. i have seen a kit on ebay.
eurojet ic with 31" x 2" x 10" core | 2" pipe diameter
http://www.ebay.co.uk/itm/261256132444?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT#ht_1573wt_952
a ths copy, size is not specified
http://www.ebay.co.uk/itm/181188973006?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT#ht_658wt_952
toyosport TYPE B 600x300x76MM
http://www.ebay.co.uk/itm/200484166200?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT#ht_996wt_952
2fast2cool ic (ths copy), size is not specified
http://www.ebay.co.uk/itm/360867746801?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT#ht_1078wt_1190
so out of all these which would you say is best?
-
I have the eurojet fmic at over 300 bhp, did require a lot of cutting but apart from that is a good kit.
That's not the 2" one by the way
-
I got a 600x300x75 with 63mm inlets, Toyosports, on eBay. £70 I think?
-
Well im going to be going over 300bhp with bbt k300 & wmi.
I have the eurojet fmic at over 300 bhp, did require a lot of cutting but apart from that is a good kit.
That's not the 2" one by the way
Im leaning towards the eurojet ic. But hacking the bumper and all that im not too keen on it for some reason
-
I had to remove a lot from the bumper.
-
I have the eurojet fmic at over 300 bhp, did require a lot of cutting but apart from that is a good kit.
That's not the 2" one by the way
Rock, what size is that one then?
-
I have the eurojet fmic at over 300 bhp, did require a lot of cutting but apart from that is a good kit.
That's not the 2" one by the way
Rock, what size is that one then?
2.5" piping, 2.5" inlet and outlet with an even larger core
-
I have the eurojet fmic at over 300 bhp, did require a lot of cutting but apart from that is a good kit.
That's not the 2" one by the way
Rock, what size is that one then?
2.5" piping, 2.5" inlet and outlet with an even larger core
so you say the eurojet is worth it?
you got any pics of what you cut mate?
-
I had to get a r32 bumper I didn't fancy hacking the original that much
-
Why don't you get a cheap bumper from a breaker and hack it so worst case you still have a backup?
Or failing that an r32 rep can be had for dirt cheap (I know some look naff, but there are some decent abs copies out there).
-
(http://i1087.photobucket.com/albums/j471/6rockmonkey9/null_zpsbd876475.jpg)
It should fit fine behind a genuine r32 bumper but the replica bumper will need trimming
-
(http://i1087.photobucket.com/albums/j471/6rockmonkey9/null_zpsbd876475.jpg)
It should fit fine behind a genuine r32 bumper but the replica bumper will need trimming
Fu*k me half of the bumper is missing there. See if i get a r32 front bumper i need the side skirts and rear bumper otherwise its going to look daft wont it?
-
A large amount of the intercooler and crash bar are still covered by the bumper, but the portion I've cut was because the bumper isn't deep enough, r32 bumper will be fine though.
Think it would look a bit odd with just the front as r32
-
A large amount of the intercooler and crash bar are still covered by the bumper, but the portion I've cut was because the bumper isn't deep enough, r32 bumper will be fine though.
Think it would look a bit odd with just the front as r32
Just the front r32 bumper is £300 odd forna genuine. I cant be arsed with a rep as i know it will never look right and that will bug my tits off.
-
I got a 600x300x75 with 63mm inlets, Toyosports, on eBay. £70 I think?
Dave, have you got the link for this? As i seen the size your on about but it states that the inlet and outlets are 3"
-
A large amount of the intercooler and crash bar are still covered by the bumper, but the portion I've cut was because the bumper isn't deep enough, r32 bumper will be fine though.
Think it would look a bit odd with just the front as r32
Just the front r32 bumper is £300 odd forna genuine. I cant be arsed with a rep as i know it will never look right and that will bug my tits off.
Not really true, mine is a rep and looks good imho :)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/t31/1799166_10152608028619018_89878155_o.jpg)
-
A large amount of the intercooler and crash bar are still covered by the bumper, but the portion I've cut was because the bumper isn't deep enough, r32 bumper will be fine though.
Think it would look a bit odd with just the front as r32
Just the front r32 bumper is £300 odd forna genuine. I cant be arsed with a rep as i know it will never look right and that will bug my tits off.
Not really true, mine is a rep and looks good imho :)
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/t31/1799166_10152608028619018_89878155_o.jpg)
How much did you pay for it? Also you got a link for it?
-
I got it from a member on here for £120 with the grilles unpainted but its ether the JOM or FK one
-
(http://i1092.photobucket.com/albums/i408/rioracer/7739BA1C-6C8C-4805-B3FD-B9D4977377EB-2941-0000020B178CB0C3_zps8dd86fcd.jpg) (http://s1092.photobucket.com/user/rioracer/media/7739BA1C-6C8C-4805-B3FD-B9D4977377EB-2941-0000020B178CB0C3_zps8dd86fcd.jpg.html)
I got anni sides and anni rear still yet to go on
-
(http://i1092.photobucket.com/albums/i408/rioracer/7739BA1C-6C8C-4805-B3FD-B9D4977377EB-2941-0000020B178CB0C3_zps8dd86fcd.jpg) (http://s1092.photobucket.com/user/rioracer/media/7739BA1C-6C8C-4805-B3FD-B9D4977377EB-2941-0000020B178CB0C3_zps8dd86fcd.jpg.html)
I got anni sides and anni rear still yet to go on
Wonder what it would look like with anni side. Btw both car looks AWESOME with the r32 bumpers!!!
-
Rios gti is awsome to be fair. Thanks fir the kind comments sharki