GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Len on 17 February 2014, 10:41

Title: Wiring Loom to engine
Post by: Len on 17 February 2014, 10:41

Right I think I have sorted most of the connection points but have a few queries.

The main earth connection direct cable from the battery negative. Does that go to one of the starter motor mounting bolts?

On the loom that goes to the back of the engine there are two little earthing points, thin cable with O ring ends. have no idea where they go!

Any photos would be gratefully received.

Title: Re: Wiring Loom to engine
Post by: weazgti on 17 February 2014, 14:38

All on edge of cam cover there's a stud.Well that's where I put mine anyway. No power when I tried anywhere else.

Title: Re: Wiring Loom to engine
Post by: thai-wronghorse on 17 February 2014, 14:51

The stud on the head does ring a bell actually.

Title: Re: Wiring Loom to engine
Post by: Len on 17 February 2014, 15:13

This cable has a shaped end as if it goes over something.
Dont think I have a stud on the head.

Title: Re: Wiring Loom to engine
Post by: weazgti on 17 February 2014, 16:02

Mines in a mk2. Honestly can't remember if the stud is there on an abf or if I took it off the pb engine and put it there.

Title: Re: Wiring Loom to engine
Post by: thai-wronghorse on 17 February 2014, 20:54

Actually thinking about it, it may have been on the rear corner rocker cover fixing?

Title: Re: Wiring Loom to engine
Post by: weazgti on 17 February 2014, 21:43

Sorry that's what I meant. I edited my post after it was read  :grin: