GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: wessexgti on 12 February 2014, 20:47
-
does anyone know of a company who make individual silicone hoses,as i brought a 5 piece set and 4 of them fit and the 5th is in no way the right size/shape for the hose its meant to replace-its the hose which goes to the pancake pipe?
also brought the 7 piece coolant hose set from forge,and could only find 5 that fitted,the other 2 just dont marry up to the hoses that my garage seem to think that they should replace.might ring forge again and see if i can nip up to them (when it stops blowing a gale/pissing down) and they can show me which hoses the 'spare' 2 are meant to replace,as 2 seperate garages/3 mechanics all carnt seem to find where there meant to go.any one else had this problem with forge's sets? its a AGU engine mk4 turbo petrol.
-
The sillicone set you got is that for an agu?
-
http://creationsmotorsport.com/products-by-category.php?main=6&catID=10 :cool:
-
ash hoses
-
agu induction hose should be like
(http://www.tuningvenair.com/images/products/620001060038r_3843.jpg)
and coolant
(http://www.tuningvenair.com/images/products/600001100095r.jpg)
I list 1 kit for the agu but other options for different codes
-
Brad, do you do the coolent hoses for AUM?
-
Brad, do you do the coolent hoses for AUM?
Well I do Venair, SFS and Samco hoses and non have a coolant hose kit for the AUM
Now Forge list a coolant hose kit for the 1.8t which doesn't specify engine code, I will try and get some pictures of the o.e set and compare if these fit ok
-
Brad, do you do the coolent hoses for AUM?
Well I do Venair, SFS and Samco hoses and non have a coolant hose kit for the AUM
Now Forge list a coolant hose kit for the 1.8t which doesn't specify engine code, I will try and get some pictures of the o.e set and compare if these fit ok
Do you do crankcase breather hose kits for an AUM?
-
Cheers brad i know CM do them but they are £80
-
I list a breather hose (1 piece) for the aum (o.e part no 06A103221AH) at £40 (I will try and get a picture from my German supplier)
I will also ask if they can get coolant hoses (My German is not good so it may be 24/48hr before they reply!)
-
Np brad. No rush bud.
-
glad i started this now,very interesting the replies you've all put up.
on the turbo boost kit (brought off a good bloke on here who told me he believed it was AGU compatabile) i need the turbo outlet hose only,and have 2 hose's to find that are'nt the right shape from the coolant set sent by forge (who claim they've never had a problem with the 7 piece set they sell for the AGU apart from me),but they clearly are the wrong shape. just to confuse matters,the coolant set from samco is a 9 piece kit,not 7 like the forge set!! :laugh:
Brad,do you sell individual hoses,rather than sets? cheers
-
Brad,do you sell individual hoses,rather than sets? cheers
Do you have a pic of the hose you have or/and need (I can see what I can get/match up as a single hose although most of the bigger brands will only sell full kits!)
-
Brad,do you sell individual hoses,rather than sets? cheers
Do you have a pic of the hose you have or/and need (I can see what I can get/match up as a single hose although most of the bigger brands will only sell full kits!)
no mate,sorry,im a total pc numpty as far as photo's go!! :undecided:
if you go on the link to creation m/s that was put up,and find the AGU 5 piece turbo boost hose set,its the small 90 degree hose in the top left hand corner (turbo outlet into the pancake pipe ) that is way too small for the AGU engine.
-
is the pipe your after this.....?
(http://creationsmotorsport.com/images/products/large/4fd0de995ef04agu.jpg)
-
Dont bother with the creation stuff. its crap.
-
Why are they crap in your veiw? I have a full setup of CM and never had a problem apart from some teething issues fitting
-
if you go on the link to creation m/s that was put up,and find the AGU 5 piece turbo boost hose set,its the small 90 degree hose in the top left hand corner (turbo outlet into the pancake pipe ) that is way too small for the AGU engine.
Can you get a bore and lengh measurement as getting a hose looks easy but I can't find any specs anywhere for the bore/length etc
-
Why are they crap in your veiw? I have a full setup of CM and never had a problem apart from some teething issues fitting
Have a look in here Nino:
http://www.golfgtiforum.co.uk/index.php?topic=264564.msg2433577#new (http://www.golfgtiforum.co.uk/index.php?topic=264564.msg2433577#new)
You can see how restrictive the CM tip is in comparison to the alternatives.
-
if you go on the link to creation m/s that was put up,and find the AGU 5 piece turbo boost hose set,its the small 90 degree hose in the top left hand corner (turbo outlet into the pancake pipe ) that is way too small for the AGU engine.
Can you get a bore and lengh measurement as getting a hose looks easy but I can't find any specs anywhere for the bore/length etc
yes mate,im having my milltek fitted next friday,so while she's up in the air on the ramp, i'll measure the hose that im after to finish the boost hose set and let ya know.
-
is the pipe your after this.....?
(http://creationsmotorsport.com/images/products/large/4fd0de995ef04agu.jpg)
thats the shape of the hose that came in the 5 piece turbo boost hose set that is nothing like the right shape/length thats needed (fits to the pancake pipe via a metal outlet pipe direct from the turbo i believe.sorry for the vagueness,im no mechanic and im going from what i was told at the time we checked it )
-
There are two types of pipes like this. One like i posted above is for the turbo without the silencer and the other pipe is alittle smaller for turbos with the silencer.