GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: Obbzi on 10 February 2014, 17:22

Title: Milltek question
Post by: Obbzi on 10 February 2014, 17:22

I have recently bought a Milltek cat back exhaust and finally got round to unwrapping it today.

These are the Milltek part numbers that I have

MSVW 287 - Back box
MSVW336 (x2) Tail pipes
MSAU343 - Middle pipe
MSVW259 - Middle pipe

Can somebody confirm if this system will go straight onto my car.

A couple of clamps were missing but these are now on the way I was just wondering with the new system being larger will it just fit onto the cat or do you need an adapter?

Title: Re: Milltek question
Post by: RocketRossUK on 10 February 2014, 18:03

It all just depend whether part number : MSAU343  reduces down to fit the OEM exhaust.

does it look like it goes smaller should be 2.75" to 2.5" or 2.37"

Get a tape measure out  :smiley:

Title: Re: Milltek question
Post by: Obbzi on 10 February 2014, 18:44

What size is the OEM pipe?

MSAU343 is 3"

MSVW259 is 2.75"

Title: Re: Milltek question
Post by: RocketRossUK on 10 February 2014, 19:53

OEM is either 2.25 or 2.37 if i remember rightly, so the pipe should thinner at one end or you need an adapter like this : Part number:  MSVW367

Title: Re: Milltek question
Post by: Obbzi on 16 February 2014, 23:57

I just needed am adapter from Milltek (f5406) which I picked up from Awesome gti will hopefully get it fitted this week

Thanks for your help Ross  :smiley: