GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: on-the-rampage on 11 January 2014, 19:47

Title: Loom out
Post by: on-the-rampage on 11 January 2014, 19:47

Any one know or has pics how to get the master cylinder drum off the car so I can get the loom out cheers

Title: Re: Loom out
Post by: dai-cymru on 11 January 2014, 20:32

Haven't done it myself but believe there is a clip holding a pin in  the brake pedal. Remove the pin then should be 3 bolts mounting the servo.

Title: Re: Loom out
Post by: weazgti on 11 January 2014, 20:35

Just loosening the nuts holding servo is enough to get loom out

Title: Re: Loom out
Post by: on-the-rampage on 11 January 2014, 20:50

Cheers guys are thy up by the pedal then

Title: Re: Loom out
Post by: Ben@VWH on 14 January 2014, 11:41

There's a retaining pin holding the servo to the pedal and 4 13mm nuts holding the servo to the bulkhead, all accesable from the drivers footwell.