GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: harkerg on 12 December 2013, 20:05
-
ok so i have a golf its stage one mapped already has filter decat straight through ect turbo is on its last legs wont hold boost so what do i need to change to achieve the 250 or so stated bhp since the turbo needs changin anyway?? i know it will need to be mapped to suit any help apreciated cheers.
gav
-
a k300 hybrid or a k04-001 :wink:
-
do you need to change the manifold with the ko3 hybrid i know you do with the ko4 i dont understand what the hybrid bit is or where i would get a ko3 hybrid from tried ebay cant find nothing would i need to change injectors maf housing ect to achieve that power with just the turbo??
-
depends what engine code you have...
-
aum
-
aum
standard turbo an some supporting mods and some r-tech magic will see near 250bhp :smiley:
-
Yeah but if he is replacing his turbo anyway it would make sense to go hybrid.
-
Where is the best place to get a hybrid k03 or k280 as I don't want to have to change my rods and how much would one set me back and with the tip hose do I need 3" or the same but uprated many thanks
-
I'm pretty sure beach buggy turbo's k280 uses a modified k03 comp housing, so you just need an uprated k03 tip. Manifold and downpipe fitting is the same, thats the whole point of a hybrid!
-
Where is the best place to get a hybrid k03 or k280 as I don't want to have to change my rods and how much would one set me back and with the tip hose do I need 3" or the same but uprated many thanks
You wont need to change your rods unless you go around 340bhp or more
-
It's not the power that bends rods, it's the torque...
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
ill let ya no in 2 months cause mine will be mapped to around 320bhp then
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
ill let ya no in 2 months cause mine will be mapped to around 320bhp then
they said torque not bhp :wink:
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
ill let ya no in 2 months cause mine will be mapped to around 320bhp then
they said torque not bhp :wink:
I no but im not sure what torque ill get.
At least ill have a fast car until it blows up
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
ill let ya no in 2 months cause mine will be mapped to around 320bhp then
they said torque not bhp :wink:
I no but im not sure what torque ill get.
At least ill have a fast car until it blows up
what engine and stuff are you running to expect 320 then
-
It's not the power that bends rods, it's the torque...
And rods have been known to bend at less than 300ft/lb
ill let ya no in 2 months cause mine will be mapped to around 320bhp then
they said torque not bhp :wink:
I no but im not sure what torque ill get.
At least ill have a fast car until it blows up
what engine and stuff are you running to expect 320 then
aug engine with stock internals
garett t3/t4 turbo
440cc injectors
fmic
adjustable fuel pressure regulator
greedy boost controller
aluminium radiator
full 3" straight through exhaust
19 row oil cooler
stage 3 clutch
-
will be interested to see what it makes when done :wink:
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
that depends. my neighbour has put load of stuff on an evo 5 and it still only makes 350bhp.
I also no a fella with an evo 7 that has a fully forged engine and that car is only making 360bhp
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
that depends. my neighbour has put load of stuff on an evo 5 and it still only makes 350bhp.
I also no a fella with an evo 7 that has a fully forged engine and that car is only making 360bhp
you want your golf faster than these evos :undecided:
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
that depends. my neighbour has put load of stuff on an evo 5 and it still only makes 350bhp.
I also no a fella with an evo 7 that has a fully forged engine and that car is only making 360bhp
you want your golf faster than these evos :undecided:
ya but I think I might have to forge the engine for that :sad:
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
that depends. my neighbour has put load of stuff on an evo 5 and it still only makes 350bhp.
I also no a fella with an evo 7 that has a fully forged engine and that car is only making 360bhp
you want your golf faster than these evos :undecided:
ya but I think I might have to forge the engine for that :sad:
and spend loads of cash the evo will always be quicker round the bends though :sad: but a member on here has an a3 running about 360bhp
-
will be interested to see what it makes when done :wink:
Me to. Quicker then most evos :grin:
standard evo maybe :wink:
that depends. my neighbour has put load of stuff on an evo 5 and it still only makes 350bhp.
I also no a fella with an evo 7 that has a fully forged engine and that car is only making 360bhp
you want your golf faster than these evos :undecided:
ya but I think I might have to forge the engine for that :sad:
and spend loads of cash the evo will always be quicker round the bends though :sad: but a member on here has an a3 running about 360bhp
is the a3 forged
-
will be a think search for prawny :smiley:
-
I don't think the standard internals will last long with your spec tbh :undecided:
-
Yes he has H section rods in his AGU, standard pistons though
-
Why the greasy boost controller?? :laugh:
-
I don't think the standard internals will last long with your spec tbh :undecided:
why what else do I need