GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: philstar on 24 November 2013, 14:31
-
I have just purchased a 1989 16v GTi and the rear wiper doesnt work. Having looked into it, I only have a single outlet on my washer bottle pump, and underneath the header tank there seems to be another multi-connector and a very thin hose that aren't connected to anything.
Photo of connector and thin pipe, header tank removed: https://plus.google.com/u/0/photos/114746994541856658936/albums/5949830986036199297/5949830987146348466?pid=5949830987146348466&oid=114746994541856658936 (https://plus.google.com/u/0/photos/114746994541856658936/albums/5949830986036199297/5949830987146348466?pid=5949830987146348466&oid=114746994541856658936)
So my question is, how should my rear wiper be connected? Should it run off the washer bottle using a twin outlet pump or is there a separate reservoir and pump for the rear wiper? What is the connector and thin pipe meant for?
-
Your pic link doesnt work. There is only on resivoir and a 3 port pump serving both front and rear washers
-
https://lh5.googleusercontent.com/--ghfHZkUTu0/UpILwl54R7I/AAAAAAAAERg/bAjFCNN6A5k/w401-h534-no/IMG_20131123_122238.jpg (https://lh5.googleusercontent.com/--ghfHZkUTu0/UpILwl54R7I/AAAAAAAAERg/bAjFCNN6A5k/w401-h534-no/IMG_20131123_122238.jpg)
Hopefully this link works...
-
Fog light plug is under header tank.
-
Does anyone have a photo of the same area on their car so I can see what it should look like? No experience with golfs yet. Mine is an '89 16v
-
Sounds like you need a twin outlet washer pump and to connect the loose pipe you have to the extra port on the new pump.
http://www.vwheritage.com/vw_spares_Washer-pump-2-outlet-Glf-Mk2-12-85-7-92-req-wiring-333955651_act_shop.product_pID_16385921.htm?crumbStartPage=4&crumbStartRow=46
This does require a very minor bit of wiring as the connector is different.
-
This is what you're missing, including the short length of tube attached (that fits onto the hard line to the rear in your pic)
(http://i222.photobucket.com/albums/dd32/mr_brown_of_hw/GTI/A7BB5B82-EC3F-44E1-9F44-5FFB4CD62FF8_zpsmtrixiif.jpg)
How it should look in the bay
(http://i222.photobucket.com/albums/dd32/mr_brown_of_hw/GTI/IMG_0175_zpsf080a731.jpg)
-
Excellent! Thanks very much! The only remaining issue now is that multi-pin connector under the header tank...