GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: AD1.8T on 01 November 2013, 18:02
-
So far ive removed well alot and im stuck I have 2 portsunder my inlet manifold where as on the guide the is only one, also on my suction jet thing it splits off and goes to the tip ? It doesnt on pats guide! Anybody care to enlighten me with what to do ?
-
I just re-read that and it makes no sense at all basically if I follow the guide im left with this pipe on the tip which went to a bracket then to a joint on the suction jet which isnt on pats guide il also be left with 1 capped port on the inlet mani and one uncapped because of this extra pipe.
(http://i846.photobucket.com/albums/ab25/yellowmgzr/20131101_182810.jpg)
-
Which guide are you using?
-
Pats one on ukmkivs mate its got all abit confusing to be fair bud do you understand my problem ? Ive given up for tonight to gather info then start again !
-
Just plug the tip, I'll need to look at the guide again to get my head around it.
-
Page 7 it mentions this extra piping but I just cant make 100% sense of it
-
Im going to go with cap everything off and see how it goes if it dont like it then I will reinstall a new hose with the check valve in it going from the tip to mani
-
Anyone know anywhere to get some decent hose thats actually flexible ?
-
I blanked all but one of the ports under the inlet manifold. I kept one for my DV.
The port in the image of your TIP is blanked off on my car, and I have one simple pipe coming from my crankcase breather (the pipe that looks like this--
(http://i.ebayimg.com/t/Breather-Hose-Seal-Clip-VW-Mk4-Golf-Turbo-Audi-A3-S3-1-8T-Eq-06A103213F-/00/s/NzY4WDEwMjQ=/$T2eC16N,!)kE9s4Z-uiMBQtkj8cteQ~~60_35.JPG)
to the cam cover breather (in your picture), to my catch can, then to the TIP.
-
What Dom said plug the tip the two under the manifold bung them up aswel you should be left with to small vac pipes use them for you dv and full pressure reg that's how mines set up runs fine no problems pats post is for agu engines you will have to bung one of you brake boosters up aswel :smiley:
-
Cheers lads shes all ready to go except the pipe I bought was far to rigid and is impossible to run to a decent place for the can also I really dont think im going to be able to get 2 19mm hoses next to eachother on the can ! This has somehow turned into a right ass of a job
-
Cheers lads shes all ready to go except the pipe I bought was far to rigid and is impossible to run to a decent place for the can also I really dont think im going to be able to get 2 19mm hoses next to eachother on the can ! This has somehow turned into a right ass of a job
You will have to get 19mm to 15mm reducers off eBay mate :smiley:
-
I really should of just splashed out on the one you linked to me really cant be arsed messing around with this anymore lol
-
So after alot longer than it should of took the catch can is in !! Looking at this picture I really dont like the matt black rocker may need to get some other form of black ...
(http://i846.photobucket.com/albums/ab25/yellowmgzr/20131106_173728.jpg)
-
You could have done a better job on the dip stick holder can still see the orange lol :smiley:
-
Haha it was all black but I snapped my old one and couldnt be arsed to spray the new one lol