GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: dom on 26 September 2013, 07:20
-
As per title, I'm looking to change my rear 20mm spacers for 15mm. I'm already running 15mm on the front and tried them on the rear but they don't sit flush with the hub, I had the same issue on my mk3.
Anyone got a link to, or brand of any 15mm spacers that fit on the rear?
-
I think the issue is down to if its running non genuine rear discs as i also discovered on my mk3 after trying a couple of sets of 15mm's before just chucking the 20mm's back on.
-
Hi, I'm not quite understanding this? Don't sit flush on hub?
As I'm running 15mm spacers on rear?
-
I'm running 15mm FK rear spacers which are bolt on versions. I had to get the standard wheel bolts machined down so they didn't bottom out on the hub when tightening them
-
I'm using 15mm on the rear and if you take the cover cap off the hub (one in the centre) the spacer will then sit flush :smiley:
-
And also allow the ingress of dirt and water into the wheel bearing. :whistle:
-
And also allow the ingress of dirt and water into the wheel bearing. :whistle:
:grin: Its a valid point tho all the same
-
i've got 15mm on rear from creation motorsports,they have the right size spigot so they sit flush
http://www.creationsmotorsport.com/product-detail.php?pid=140
-
i've got 15mm on rear from creation motorsports,they have the right size spigot so they sit flush
http://www.creationsmotorsport.com/product-detail.php?pid=140
Perfect :afro:
-
am i missing something here? spacers that fit the front but not rear?
I previously ran 15mm spacers on the front with no problems.
but swapped them for 20mm and used the 15mm for the rear when i put new set of wheels on.
And now i've got steering wheel wobble.
-
im looking 2 get spacers as just loward my car waz thinking 20mm on bk and 15mm on front bit confuzzed now needs advise asap cheers
-
I'll get some pics tomorrow to show the problem
-
we're waiting... :wink:
-
we're waiting... :wink:
Balls, I had the wheels off earlier and forgot!
-
Bloody nippers :rolleyes:
-
still waiting :whistle:
-
i've got 15mm on rear from creation motorsports,they have the right size spigot so they sit flush
http://www.creationsmotorsport.com/product-detail.php?pid=140
I got the same ones on the front, great spacers tbh.
-
still waiting :whistle:
:grin:
It'll have to wait until next week when I can get the car up on a mate's ramp, no way I'm messing around outside in the wind and rain now :grin: