GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: darren1.8t on 16 September 2013, 07:07

Title: help needed with ko3s pipe work from turbo asap
Post by: darren1.8t on 16 September 2013, 07:07

right guys I fitted a new ko3s to my auq on sunday!! but were do I run the pipes correctly? on the tip there is a stump for a hose and im stuck witch way they go ? does any have a decent picture? I have 2 pipes from n75 then a pipe from actuator what goes were as I think I have done them wrong help would be great cheers guys

(http://i820.photobucket.com/albums/zz124/darren1093/turbo.jpg) (http://s820.photobucket.com/user/darren1093/media/turbo.jpg.html)

this is not my turbo but the pipe from the outlet tip were should that pipe run?

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: Wazzzer on 16 September 2013, 10:46

I'll have a look in a bit but I'm sure that goes to your N75 as well

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: Wazzzer on 16 September 2013, 11:44

Ah hang on, doesn't that one go back to the carbon canister?

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: rfn_hodgson on 16 September 2013, 12:14

Wazzer you are right there. I only know this I've I've just done the ultimate delete and that does go to the carbon canister I'm sure of it!! :)

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: Wazzzer on 16 September 2013, 12:43

Yeah mines blocked off too

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: darren1.8t on 16 September 2013, 18:09

 has anyone got any pics  to were the pipes should go?

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: darren1.8t on 17 September 2013, 06:17

 :sad: anyone

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: Wazzzer on 18 September 2013, 12:33

No cos mine has gone... It runs under the scuttle back to the catch can though.

I can tell you where the pipes should go on the N75 if you want?

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: dom on 18 September 2013, 13:05

It runs differently on an AUM so I'd guess it's the same on an AUQ as well. The pipe does not run along the scuttle to the carbon canister, instead it joins a hardline that runs along the right hand side on the block (near the combi valve for the SAI). This joins a second hardline that runs along the front of the engine underneath the FPR.

A hose comes off the second hardline and T's where the finger is pointing in the picture below. One end goes to the TB and the other to the carbon canister.

(http://i944.photobucket.com/albums/ad290/theechemist/P310110_1624-1.jpg?t=1266191111)

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: Wazzzer on 18 September 2013, 15:09

Ah yes sorry it's all linked up with those hoses near the inlet...

Title: Re: help needed with ko3s pipe work from turbo asap
Post by: darren1.8t on 18 September 2013, 21:07

cheer guys your true gents  :wink: im gonna take the car to topher on sat and let him work his magic ive fitted new turbo new pipes etc still don't boost right and runs like crap lol