GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: sharki786 on 13 September 2013, 19:44
-
My mate is giving me a gt28rs turb. He said it does need rebuilding so will get beach buggies to have a lookie at it. Anyway my question is. Do i need to change the manifold for it to fit or can i fit it on the same k03 manifold? Other thing is, whats the max power you can get from one of these?
-
will need another manni as it wont fit your 1 :smiley:
-
Which one bud?
-
http://www.jbsautodesigns.co.uk/product/2886/garrett-gt28-stage-1-underslung (http://www.jbsautodesigns.co.uk/product/2886/garrett-gt28-stage-1-underslung)
-
getting 1 made for my k04 just now :wink:
-
Correct me if im wrong, but..... A GT**** 1.8t build is surely going need a fairly serious build / spec?
Rods
pistons
manifold
down pipe
injectors & maf
fuel pump
etc etc !?
-
Yeah, it's definitely not a case of just sticking it on, its not a cheap conversion.
-
So going to cost quiet abit then :grin:
-
Depending on your current spec, I'd say set aside £1500 for it.
-
Depending on your current spec, I'd say set aside £1500 for it.
f**k i was nearly that for a turbo,manni an new fuel pump :cry: then the cost to have them fitted
-
Depending on your current spec, I'd say set aside £1500 for it.
f**k i was nearly that for a turbo,manni an new fuel pump :cry: then the cost to have them fitted
That was assuming he is being given the turbo for nothing :grin:
-
Depending on your current spec, I'd say set aside £1500 for it.
f**k i was nearly that for a turbo,manni an new fuel pump :cry: then the cost to have them fitted
That was assuming he is being given the turbo for nothing :grin:
the turbo he is being given needs a rebuild :cry:
-
Ye lads its free. But does need rebuilding as the bearings are fooked. He had something missing on the oil feed pipe so oil was just pushing past the bearings and they wore out.
-
Beach buggy wants about 400 for rebuild :lipsrsealed:
Manifold - 500
Will a lcr fuel pump do?
Which injectors?
Me and my unc will be putting it together hopefully.
P.s beach buggy said about top mouting the turbo??
-
Gonna need:
Downpipe
Oil feed/return
Coolant feed/return
Air Intake pipe
Rods
New gaskets and bearings for engine while fitting rods which also means you might as well replace the rings
Bigger injectors (probably 550's from badger 5)
S3 maf or maybe bigger
Cupra r pump maaaaay be ok but would be safe to have a uprated pump
Custom fmic pipes I account for turbo bein in a different place
Etc
-
Not to mention a remap to get the most out of it. Also I would say Con Rods would need to be replaced too?
-
Yeah I said rods but your right will also need a map!
And also a clutch which is about £800
Your lookin at about 360 bhp and a good £2500+ in parts
-
Yeah I said rods but your right will also need a map!
And also a clutch which is about £800
Your lookin at about 360 bhp and a good £2500+ in parts
:shocked: :shocked:
Also which clutch is that for 800?
And a manifold
-
.....turns out more expensive then you first think :laugh:
-
.....turns out more expensive then you first think :laugh:
f**k trust me
Which clutch do i need thats 800?
-
Someone did the gt28rs convo. Who was it? Was about a month ago or so. All i know is that he also drives a white mk6 or 7
-
£800 was a rough guess
I think paddle clutchs capable of 400bhp are about £500 plus vat but I'm not sure which is best!