GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: brewey on 28 August 2013, 14:41

Title: Fitting a milltek to 1.8t
Post by: brewey on 28 August 2013, 14:41

I hope this doesn't seem like I'm asking a question that I've already answered but I've searched and couldnt find anything useful.

At the weekend I bought a second hand cat back system for a bargain price. Just gone and had a look now to set about fitting it and it has all clamps to hold the 3 pieces together but nothing for attaching to the cat.

Am i right in thinking that I will need a 2.5'' to 2.25'' reducer/ joiner to mount the milltek to the existing cat/ downpipe and then 2 clamps to hold this in place?

If this is the case does anyone know where I can get it all ASAP to get it all fitted, as now it's in the garage I want it on.

Thanks for any help anyone can give.

Mike.

Title: Re: Fitting a milltek to 1.8t
Post by: barrym381 on 28 August 2013, 15:24

find a local custom exhaust place they will make you it in 2 mins  :smiley:

Title: Re: Fitting a milltek to 1.8t
Post by: brewey on 28 August 2013, 15:30

Thanks for the reply, so is it what I need, an adapter sleeve?

Title: Re: Fitting a milltek to 1.8t
Post by: barrym381 on 28 August 2013, 18:27

think awesome gti sell them  :smiley:

Title: Re: Fitting a milltek to 1.8t
Post by: dom on 28 August 2013, 19:32

You will need a reducing sleeve as you said in your first post, most custom exhaust places should be able to provide you with/make you one.

Title: Re: Fitting a milltek to 1.8t
Post by: brewey on 28 August 2013, 21:50

Thanks guys!

I've found a decent custom shop nearby, so I'll give them a ring tomorrow see when they can sort it for me.

Title: Re: Fitting a milltek to 1.8t
Post by: davemk4 on 29 August 2013, 10:53

Oh get them to make them flanged fittings for easier fitting and removel its what i did with mine