GolfGTIforum.co.uk
Model specific boards => Golf mk6 => Topic started by: Richie.27 on 14 August 2013, 14:49
-
I've managed to get hold of some 35 edition wing badges as the previous owner had them removed. Can anyone help me with regards to some measurements so I can get as close to where they would've been from the factory!! Maybe just a measure from the wing crease and wing edge would be great. Thanks
-
Ya local VeeDub body shop should be able to give you the exact measurements mate.
-
Ya local VeeDub body shop should be able to give you the exact measurements mate.
Thanks. I have tried my local dealer who I bought the badges off, and he told me to guess!! May have to phone around some dealers if no joy on here. Thanks buddy all the same.
-
Anyone with ETKA; does it give you the specs etc on there?
Give TL Darby a ring in burton on 01283 531331 and ask them.
-
Best pic I have:
http://www.golfgti.co.uk/pageimages/frankfurt11/3.jpg
-
i'll try and do a measure on mine this weekend, worth posting a pic of the badge in packaging as from memory i thought they were templates
-
Thanks for that jv!!
-
If you could do that wigit that would be most helpful. I did ask when I ordered the badges if they came with a template, as my type R decals did. But the dealer seems to think not. Until they arrive I won't know. I'm on holiday at the moment so will know more when I get home.
-
the top edge of the 35 is 8mm from the crease line
on the drivers side (assuming RHD) the bottom left corner of the 3 is 18mm from the door edge
on the passenger side the top right corner of the 5 is 27mm from the door edge
i'd use sum detailing tape to line it up which I did when i put them on the rear
-
Wigit you are a legend!! So helpful. Thankyou.
-
Why would you take them of in the first place I bet they were not cheap good luck with sticking them back on :smug:
-
Your guess is as good as mine!! And nope not cheap but with the help of some forum members they should go back on fine!!