GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: 150+ on 30 June 2013, 14:29
-
Just found a split in this pipe :laugh:
(http://i215.photobucket.com/albums/cc233/1330gt/image-16.jpg) (http://s215.photobucket.com/user/1330gt/media/image-16.jpg.html)
-
Vac line for the Fuel pressure regulator
Change ASAP :smiley:
-
Fuel pressure regulator, get the pipe replaced with 3mm silicone vac pipe along with the pipe going to your dv asap
-
Vac line for the Fuel pressure regulator
Change ASAP :smiley:
Damn you, beat me to it lol
-
:grin: :laugh:
-
When you say back to the DV!! I can only see it go to the bottom of the inlet?? It's about 6 inch long
-
yes, replace that, and the one from the dv to the metal pipe too.. the matal pipe should have two rubber pipes on each end, one to the dv and one to the manifold
-
So 2 bits about 6inch long
-
What would it have done if I hadn't have spotted it :whistle:
-
Just buy a meter of it of the bay
Will be messing up your fueling and causing a vacuum/boost leak
-
Right changed the regulator pipe
(http://i215.photobucket.com/albums/cc233/1330gt/image-17.jpg) (http://s215.photobucket.com/user/1330gt/media/image-17.jpg.html)
Jamie is this the other pipe your on about
(http://i215.photobucket.com/albums/cc233/1330gt/image-18.jpg) (http://s215.photobucket.com/user/1330gt/media/image-18.jpg.html)
-
Bloody hell that was fast, yes, that pipe and the one next to the one you changed for the fpr ( under the inlet mani)
-
Follow the metal pipe you took the dv hose from and it'll lead you to the pipe I'm talking about!
-
Ok...it's abut hot under there ATM
(http://i215.photobucket.com/albums/cc233/1330gt/image-19.jpg) (http://s215.photobucket.com/user/1330gt/media/image-19.jpg.html)
Is it the one with the material round it or the on beyond that, that u can just see the one time clip thing??
I have a motor spares shop open 7 days a week :smiley: 2 mins from me
-
The one from the DVD seems good plus the pipe I just got wont fit over the metal pipe!!
And the other 2 seem ok as well
-
It will if you stretch it!
-
Fooking hell!! That was a hard pipe to stretch!! I've only been able to get it on about 8-10mm Over the metal pipe do you think it will hold??
-
10mm should be plenty, as long as it passes the barb. A bit of spit would have made it easier to slip on.
-
Cool :wink:
Thanks for your help agian Jamie