GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: 150+ on 19 June 2013, 18:18
-
Can anyone shed some light on this for me.
Doesn't happen all the time but more than I would like, I'll go to put my foot down in 2nd and the asr light starts to flash and won't give off any more power...so stays at like 2k revs until I turn the asr on and off
Any help would be great thanks in advance
Aaron
-
Mine was doing this then after a tb clean it stopped :-)
-
Sweet!! Will give it a try any do's or don'ts when removing and cleaning
-
Also car is idleing slightly higher than normal just over 1k normally it's 8-900
-
(http://i215.photobucket.com/albums/cc233/1330gt/image-13.jpg) (http://s215.photobucket.com/user/1330gt/media/image-13.jpg.html)
Does that look dirty?? And what is the brown stuff?? I'm guessing it shouldn't be there
-
Looks pretty clean, what's it like when you open up the valve?
The brown stuff is just a little oil by the looks of it
-
Couldn't open the valve but maybe being to soft with it how hard should I be with it??
-
Its normal to have abit of oil in there, you want to check the otherside as well.
Also check all your vag lines for leaks and clean your maf.
-
Is that not just the traction control cutting in as it should :undecided:
-
Shouldn't that only happen if the asr is on, just stops the car from lighting up
-
Shouldn't that only happen if the asr is on, just stops the car from lighting up
It will still cut in even if you switch it off, it is always working in the background from what I was told.
-
Ok....
Had a quick look at maf and it looked fine but I don't really know what I was lookin for the "gates" on either side wee not blocked although the clip that goes on the top of it had a couple of split plastics bit inside if that makes seance
-
Right
I've changed the maf for a gen Bosch one and had new coil packs fitted but still misfiring
Any ideas???