GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: daz207 on 15 June 2013, 14:06
-
Well yesterday was driving along and could hear a noise like a exhaust blow thought best have a look at that when i get home but it dint last till i got home the middle section came away from the bit the gose over the back been :angry: i had to get it home so drove it for about 6 miles and i have to say alot of ppl was looking at me lol just had a look now and all my exhaust clamps are loose :angry: i have done them all up now but i am going to guess they will come loose again is there better clamps i can get ?
3inch ebay exaust
1.8t
-
What clamps are you using?
-
the standard ones that came with the kit
http://www.classicchambered.com/pic/clamp3.gif
like these
-
You'll be wanting some Mikalor then, they aren't cheap but they wont come loose either.
-
Best ones I found were just normal U clamps
-
Best ones I found were just normal U clamps
+1
-
the one that came standard with the kit is 100% dog poo..... :angry: The 1st thing I did is buy new heavy duty clamps.
-
I have used mikalor and haven't had any problems with them. As said the ones supplied are sh11t
-
Can only see the ones supplied being sh!t because the nuts vibrate loose.
Thread lock or nylon nuts, I'm guessing. Gonna see if mine moves and then attack it.
-
Best ones I found were just normal U clamps
+1
+2
that's what ive got, and put some cheep thread lock type sh!t onto them just incase...
-
Do you mean these ?
http://www.clampcouk.co.uk/exhaust-repair/exhaust-clamps/stainless-steel-mikalor-clamps/stainless-steel-mikalor-clamps.html
-
Just go into Halfords and and ask them for some u clamps