GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: tubsy250 on 29 May 2013, 07:10

Title: D/v for ed35
Post by: tubsy250 on 29 May 2013, 07:10

Hi just started to play around with my ed35 and just wondering what make and model d/v I need .is the std one that bad  it,car is running stage 1 remap and soon milltek tbc -

Title: Re: D/v for ed35
Post by: pryda on 29 May 2013, 09:01

I think this Forge DV kit will fit an ed35... http://www.ebay.co.uk/itm/140584436087

Title: Re: D/v for ed35
Post by: wigit on 29 May 2013, 15:47

I'd stick with the stock one

Title: Re: D/v for ed35
Post by: Ginge 35Edition on 29 May 2013, 18:56

Quote from: wigit on 29 May 2013, 15:47

I'd stick with the stock one

Wigits the man when it comes to performance mods mate!

Title: Re: D/v for ed35
Post by: wigit on 29 May 2013, 20:08

the forge one needs maintaing, if not can seize

in reality forge stuff has never floated my boat, later VW ones are up to the job and around £50 to replace

Title: Re: D/v for ed35
Post by: Marshy on 29 May 2013, 22:58

Yeah stick with stock.
Revision D has been very reliable with very few problems.
Some people say to use the latest revision G type which isa new version of the diaphram type as it holds boost better.
On my last car I tried both and stuck with the original revision D piston type.

Title: Re: D/v for ed35
Post by: tubsy250 on 31 May 2013, 07:47

Thanks guys will be sticking with the std one