GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: jamie16v on 21 May 2013, 21:57

Title: actuator springs t2 or t3
Post by: jamie16v on 21 May 2013, 21:57

anybody know what spring type the forge actuator for k03s takes?.. seen two types available and look simular, the t2 and t3. which type should i buy  :undecided:

Title: Re: actuator springs t2 or t3
Post by: rio_gti on 21 May 2013, 22:26

This sounds like I'm not helping but it depends which actuator u have... The diaphragms are Different pose a pic of your actuator

Title: Re: actuator springs t2 or t3
Post by: jamie16v on 21 May 2013, 22:49

i did ask a seller on ebay and he said, it depends on the diameter of the larger end of the spring..
i was just being lazy... now ive got to take the actuator off... :sad: lol

Title: Re: actuator springs t2 or t3
Post by: rio_gti on 22 May 2013, 09:23

just measure the diamiter of the top of the actuator (without taking it off) that way you will know if it is the 80mm (t3) or the 63mm (t2)  :wink:

Title: Re: actuator springs t2 or t3
Post by: jamie16v on 22 May 2013, 09:59

brilliant, thanks mate.  :smiley:

Title: Re: actuator springs t2 or t3
Post by: jamie16v on 22 May 2013, 11:53

hmm... 50mm. measured with vernier caliper  :tongue: :undecided:

Title: Re: actuator springs t2 or t3
Post by: rio_gti on 22 May 2013, 12:31

T2 then  :wink:

Title: Re: actuator springs t2 or t3
Post by: jamie16v on 22 May 2013, 12:32

lol. ok thanks rio  :smiley: desperate need, as i`m boosting to 25+ psi at the moment  :shocked:
might need a mbc too  :tongue: lol