GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: daz207 on 15 May 2013, 04:59

Title: more problems
Post by: daz207 on 15 May 2013, 04:59
right i have to prob with my golf  :sad: first thing is my clutch about a month ago i had a prob with it just staying on the floor but after a few pumps it would work again i bled the system a few times and it would be ok for about 2 days then go bk i done this for about 2 weeks so thought i better buy a master cylinder but after buying one it has been working fine till now it has started going to the floor again but only dose it when i drive fast if i just drive slow it will be fine any idears what that could be ?

on the way home tonight the car seemed to struggle as in i boot it and felt like the coil packs where gone again but they where replaced by VW about 2 months ago is there anything else it could be i did have my traction control light stay on the over day and ppl said it is the maf would that make the car run how it did ? once the car gets nice and warm it dose not seem to judder if that helps anyone
Title: Re: more problems
Post by: Scott-R on 15 May 2013, 06:26
Sounds like you need vag-com if the golfs gonna act like this for a while.

Lifesaver of a buy for me for when the vw's feel like playing with our heads ha
Title: Re: more problems
Post by: luke on 15 May 2013, 07:43
Mine was doing similar the other day, felt like it had no power and wouldn't pull, the maf came unplugged, put it back in and ran fine again
Title: Re: more problems
Post by: daz207 on 17 May 2013, 21:34
right changed the clutch master cylinder today and it is a little bit better but still dose not come up all the way back up after booting it  :sad: when i was bleeding it the fluid would not go clear there was always bubbles and some times it would even come out looking like foam  :undecided: i really dont no what else to do
Title: Re: more problems
Post by: D@nCeR on 18 May 2013, 03:57
Are you bleeding it from the slave? Also make sure to keep adding fluid.... When I did mine it took near 1.5litres to get working properly again..
Title: Re: more problems
Post by: daz207 on 18 May 2013, 05:13
Yea doing it from the slave and i used a out a 1L bottle .when i press the clutch pedal down there is a squeak from where the slave cylinder is