GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: 212bhprabbit on 07 May 2013, 14:38
-
Hi people!!got a bit of a problem...I had a ko4 put on my 1.8t and had it remapped at amd in Essex!!before I took it the i noticed car had lag so I told them that and they said it will be always like that...my old golf never done that with a ko4 but since having it back iv got crud torque but amazing top end after 2800 revs!!has any1 got any idea what I can do to lose the lag?thanks guys
-
Get it remapped somewhere else?
I've not felt much lag in Tobys old K04 Golf...
-
I got told amd were best for remapping on vw!i also got told that the turbo was to big for the engine!
-
may want to be careful, bent rods are more prone on standard engines if sticking a bigger turbo on, and remap wise i would say rtech even tho they are Revo, they seem to spend more time on your car than other Revo mappers
-
:smug:
may want to be careful, bent rods are more prone on standard engines if sticking a bigger turbo on, and remap wise i would say rtech even tho they are Revo, they seem to spend more time on your car than other Revo mappers
That's because rtech do complete custom maps not just generic ones which means they get your car running perfect just don't expect sh!t loads more power from as they map it so it's actual useable not just wildly spinning up everywhere trust rtech are the place to go good power that you can use go there and don't expect any less than 300 if your using the right set up on your k04
-
:smug:may want to be careful, bent rods are more prone on standard engines if sticking a bigger turbo on, and remap wise i would say rtech even tho they are Revo, they seem to spend more time on your car than other Revo mappers
That's because rtech do complete custom maps not just generic ones which means they get your car running perfect just don't expect sh!t loads more power from as they map it so it's actual useable not just wildly spinning up everywhere trust rtech are the place to go good power that you can use go there and don't expect any less than 300 if your using the right set up on your k04
SHAZAAM!
-
what FMIC and tubing are you using?
K04s from what I know take a while to spool anyway (unless its a hybrid) so at 2,800 is probably where it starts picking up